Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications

  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • CV axle shafts
  • Brand New
    • Not remanufactured
    • No core charge
  • Built to strict quality control standards

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:23)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (1:27)
    • Remove the center cap
    • Reinstall the wheel
    • Tighten the lug nuts by hand
    • Lower the vehicle to the ground
    • Loosen the axle nut with a 34mm socket and breaker bar
    • Raise and secure the vehicle on jack stands
    • Remove the wheel
    • Tap on the end of the cv axle with the nut flush with the shaft
  3. step : Removing the Brake Caliper and ABS Sensor (4:26)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Remove the 10mm bolt from the ABS sensor
    • Remove the ABS sensor from the knuckle
  4. step : Removing the CV Axle (4:49)
    • Remove the lower strut bolts with 24mm socket and breaker bar, counterholding with a 21mm wrench
    • Tap the end of the axle with a hammer to release it
    • Remove the nut
    • Slide the axle out of the knuckle
    • Have a drain pan ready
    • Pry the axle out of the transmission
  5. step : Installing the CV Axle (9:40)
    • Transfer the metal washer from the old CV axle to the new one
    • Insert the CV axle into the transmission until it hits the lock ring
    • Tap the CV axle into place with a dead blow hammer until it's locked in
    • Clean off any leaks from the transmission case with brake parts cleaner
    • Insert the CV axle into the knuckle
    • Thread the axle nut on by hand
    • Insert the lower strut bolts into the knuckle
    • Tighten the strut bolts with a 24mm socket and ratchet and a 21mm wrench
    • Torque the nuts to 144 foot-pounds
  6. step : Installing the Brake Caliper and ABS Sensor (13:14)
    • Insert the ABS sensor into place
    • Tighten the 10mm bolt to the sensor
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 47 foot-pounds
    • Tighten the axle nut down until the axle turns
    • Clean the rotor with brake parts cleaner or mineral spirits
  7. step : Reattaching the Wheel (16:05)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a crossing or star pattern
    • Tighten the hub nut to 173 foot-pounds
    • Press on the center cap

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Bungee Cord

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 24mm Socket
  • 13mm Socket
  • 21mm Socket
  • 34mm Socket
  • 10mm Socket
  • 22mm Socket

  • Specialty Tools

  • Dead Blow Hammer

  • Wrenches - Metric

  • 21mm wrench
  • 22mm Wrench
  • 13mm Wrench

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
GREAT Replacement
Great replacement hardware comes with new axle nut also same size as oe boots looks very durable great price for 2.
May 7, 2018
CV SHAFTS
Came with easy to follow instructions. I installed both in about one hour. They fit perfectly and no extra parts were need. I would recommend them to all my friends.
October 8, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What brand are they?
Ralph H January 13, 2016
Hello, These are a 1A Auto house brand and carry a limited lifetime warranty.
Brian F January 13, 2016
Is there a repair video specific to a GMC Acadia for CV Axle shaft replacement? There is one on Youtube but not very professional.
Jason P May 30, 2017
Year Make Model Description
2008-2014Buick Enclave Buick Enclave Front CV Axle Shaft Pair TRQ CSA82448
2009-2014Chevy Traverse Chevy Traverse Front CV Axle Shaft Pair TRQ CSA82448
2007-2015GMC Acadia GMC Acadia Front CV Axle Shaft Pair TRQ CSA82448
2007-2010Saturn Outlook Saturn Outlook Front CV Axle Shaft Pair TRQ CSA82448
Part #: 1AACS00123


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: CSA82448

How-to Video:

(17:13 min)