Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part number: 15868123
  • Approximate Dimensions:
    • Length: 23-7/8"
    • Inboard Spline Count: 33
    • Outboard Spline Count: 6 Bolts
  • Built to strict quality control standards

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:12)
    • Remove the three 18mm nuts holding the top of the strut
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (2:14)
    • Turn the wheel by hand
    • Hold the upper stabilizer link stud with a 15mm wrench
    • Remove the lower nut from the stabilizer link with a 15mm wrench
    • Pull off the stabilizer link
  3. step : Removing the Suspension (2:50)
    • Remove the shock strut with a 15mm socket and ratchet
    • Press down on the suspension and pull the strut down and out
  4. step : Removing the Axle (3:34)
    • Remove the center cap with a hammer and chisel and flat blade screwdriver
    • Have an assistant hold the brakes
    • Remove the 36mm nut from the hub
    • Place a flat blade screwdriver in the brake rotor
    • Remove the six 15mm bolts holding the axle to the differential
    • Pull the axle out of the differential
    • Remove the axle
  5. step : Installing the Axle (4:50)
    • Insert the axle into the hub
    • Insert the other end into the differential
    • Insert and tighten the six 15mm bolts
    • Torque the 15mm bolts between 55 and 60 foot-pounds
  6. step : Installing the Suspension (5:41)
    • Tighten the 18mm nuts to the top of the strut by hand
    • Insert the strut into place
    • Insert and tighten the 15mm bolt and clips to the bottom of the strut
    • Torque the 15mm bolt between 70 and 75 foot-pounds
  7. step : Reinstalling the Stabilizer Link (7:00)
    • Push the stabilizer link into place
    • Tighten the upper nut onto the stabilizer link with a 15mm wrench
    • Hold the upper nut with a 15mm wrench
    • Fasten the lower nut onto the stabilizer link with a 15mm wrench
  8. step : Reattaching the Wheel (7:18)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut to 156 foot-pounds
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the three 18mm nuts to the top of the strut
    • Tighten the 18mm nuts to 70 foot-pounds

Tools needed for replacement:

    General Tools

  • Assistant

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 22mm Socket
  • 36mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Easy replacement
Just like stock...fast shipping and high quality. Highly recommend
June 14, 2018
Purchased
4 weeks ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2014 Cadillac Escalade Front CV Axle Shaft TRQ CSA82121
  • 2007-2014 Cadillac Escalade ESV Front CV Axle Shaft TRQ CSA82121
  • 2007-2013 Cadillac Escalade EXT Front CV Axle Shaft TRQ CSA82121
  • 2007-2013 Chevy Avalanche 1500 Front CV Axle Shaft TRQ CSA82121
  • 2007 Chevy Silverado 1500 New Body Style Front CV Axle Shaft TRQ CSA82121
  • 2008-2013 Chevy Silverado 1500 Front CV Axle Shaft TRQ CSA82121
  • 2007-2014 Chevy Suburban 1500 Front CV Axle Shaft TRQ CSA82121
  • 2007-2014 Chevy Tahoe Front CV Axle Shaft TRQ CSA82121
  • 2007 GMC Sierra 1500 New Body Style Front CV Axle Shaft TRQ CSA82121
  • 2008-2013 GMC Sierra 1500 Front CV Axle Shaft TRQ CSA82121
  • 2007-2014 GMC Yukon Front CV Axle Shaft TRQ CSA82121
  • 2007-2013 GMC Yukon XL 1500 Front CV Axle Shaft TRQ CSA82121

This part replaces:

  • Hollander 447-00186
  • OE # 15868123
  • A1 Cardone 66-1430
  • TRQ CSA82121
Part #: 1AACV00084

TRQ
Brand #: CSA82121

How-to Video:

(08:18 min)