Replaces

CV Axle Shaft Front Pair TRQ CSA82482 - 1AACS00103

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Front

Specifications

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • CV Style Axle Shafts
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge
  • Does NOT fit Sport Trac Models

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:43)
    • Pry off the center cap with a flat blade screwdriver
    • Remove the 30mm hub nut
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Loosening the Axle (1:31)
    • Remove the 18mm control arm nut
    • Twist the 18mm on by hand a few threads
    • Hammer the wheel knuckle until it slides down
    • Hammer the axle out with a pry bar
    • Remove the 18mm nut
    • Pull the wheel knuckle forward
  3. step : Removing the Stabilizer Link (2:39)
    • Insert a 15mm socket and ratchet on the top
    • Insert a 16mm socket and ratchet on the bottom
    • Remove the bolt and remove the stabilizer link
    • If the link is broken, fill the top with rust penetrant
    • Insert locking pliers onto the bar
    • Remove the lower bolt with a 16mm socket and ratcher
    • Remove the plastic tube, remove the rest of the plastic with a hammer and chisel
    • Use locking pliers on the upper bushing and remove the lower nut
    • Hammer out the stabilizer link
  4. step : Removing the Axle (4:23)
    • Turn the wheel knuckle
    • Slide the axle back and remove it from the hub
  5. step : Installing the Axle (4:48)
    • Insert the axle into the hub
    • Preliminarily tighten the hub nut
    • Insert the axle into the differential case
    • Push the ball joint into the wheel knuckle
    • Hand tighten the 18mm nut
    • Check to make sure the axle is in place
    • Tighten the 18mm nut
    • Tighten the 18mm nut to 90 foot-pounds
  6. step : Reinstalling the Stabilizer Link (6:09)
    • Slightly jack up the other side of the vehicle
    • Insert a washer onto the link
    • Insert a bushing onto the link
    • Insert the stabilizer link into place
    • Insert a bushing onto the link
    • Insert a washer onto the link
    • Insert the tube onto the link
    • Insert a washer onto the link
    • Insert a bushing onto the link
    • Insert the link through the sway bar
    • Insert a bushing onto the link
    • Insert a washer onto the link
    • Tighten the 15mm nut to the top of the link
    • Lower the jack
    • Tighten the 16mm nut on the bottom of the link
  7. step : Reattaching the Wheel (7:45)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut to 180 foot-pounds
    • Tighten the lug nuts to between 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 18mm Socket
  • 16mm Socket
  • 30mm Socket

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Everytime it quality parts and on time free shipping !!!
I greatly appreciate the in-depth how-to videos. Though I have been doing some of my own repair for a long time, the vehicles change and with that the parts and installations change. The videos show the installation of that part for the right model leaving me with no guess work. A great time saver. The parts seem to be the same quality as other parts I may have had to pay up to twice the amount buying from a local retailer who most of the time wont be able to tell me "how to" replace a part. I have had 1 A Auto parts in various vehicles for some time now and have not had problems with any. as long as I can get my parts from 1A Auto and have the video to show me replacement on my model vehicle, I will buy from them. Thanks to the staff at 1A Auto. I do recommend 1A Auto parts and videos to everyone.
November 7, 2017
Great item
Found the par easily and it arrived on time. Great installation instructions as well. I order all my parts from 1a auto
November 29, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I have the cv joint loose from axle but wont slide out of axle all the way?
Terry Y September 20, 2018
I apologize but we do not have installation instructions for this particular pair of cv axles other than the video on the listing at the bottom of the images.
Peter M September 20, 2018
Year Make Model Description
2002-2005Ford Explorer Ford Explorer 4 Door CV Axle Shaft Front Pair TRQ CSA82482
2003-2005Lincoln Aviator Lincoln Aviator CV Axle Shaft Front Pair TRQ CSA82482
2002-2005Mercury Mountaineer Mercury Mountaineer CV Axle Shaft Front Pair TRQ CSA82482
Part #: 1AACS00103


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: CSA82482

How-to Video:

(08:47 min)