• Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Brand New
    • Not remanufactured
    • No core charge
  • Overall Length: 19-1/4"
  • Direct replacements
  • Built to strict quality control standards

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the CV Axle (0:53)
    • Pry off the center cap with a flat blade screwdriver
    • Pull off the hub dust cover with pliers
    • Remove the 13mm axle nut
    • Have an assistant hold the tire or press the brakes
    • Remove the six 12-point, 12mm bolts that hold the CV axle to the solid axle
  2. step : Disconnecting the Strut (2:10)
    • Remove the 30mm nut bolt from the bottom of the strut
    • Tap the 30mm bolt out with a hammer
    • Pry the strut aside with a pry bar
  3. step : Removing the CV Axle (3:06)
    • Pull the CV axle past the solid axle
    • Pull the CV axle out of the wheel hub
    • Pull the CV axle out past the solid axle
  4. step : Installing the New CV Axle (3:47)
    • Slide the CV Axle into position
    • Slide the CV Axle into the wheel hub
  5. step : Reconnecting the Strut (4:19)
    • Pry the strut into the lower control arm
    • Fasten the 30mm nut and bolt onto the bottom of the strut
    • Tighten the 30mm nut and bolt to between 95 to 100 foot-pounds of torque
  6. step : Reconnecting the CV Axle (4:49)
    • Line up the CV axle with the solid axle
    • Insert the six 12-point, 12mm bolts into the CV Axle
    • Tighten the 12mm bolts to 25 foot-pounds in a crossing or star pattern
    • Fasten the 13mm nut onto the end of the axle
    • Tap on the dust cover with a hammer
    • Push on the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Assistant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 24mm Socket
  • 30mm Socket
  • 13mm Socket
  • 12mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great replacement
I just installed these meaty cv joints yesterday. The video from 1aauto was very helpful and gave me the confidence to tackle the job myself. My steering is very tight now, a very noticeable difference from my loose steering. I will continue to purchase parts from 1aauto. Thanks!
August 13, 2018
1 month ago
F150 front axles
Came a day sooner the eta. Good quality and fit well.
February 26, 2018
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 12 answers
what Outer Joint Spline Count should I get for a 04 f150?
njdownswv on Sep 24, 2015
BEST ANSWER: You have to be careful of which wheel assembly you have. My truck is a Lariat that has 6 lugs, some of the 04's depending on the model had 5 which I think set the spline count
Does this fit 2006 4x4 with 6 lug bolts, and this pkg comes as two? One for driver side and one for passenger side
Jay A on Feb 23, 2016
BEST ANSWER: It does fit that pattern, I bought mine for my 04 fx4 I just can't remember if they came with two, I wanna say they do Coke as a pair
What brand are these and are they made in the USA?
William J on Dec 2, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
I have a leveling kit and a 2 inch lift kit, will these work?
Levi H on Jul 29, 2018
BEST ANSWER: These parts are designed to be used with stock vehicles. If you have a lift kit installed on your vehicle this parts may not work.
How many bearings are inside the inner end three or five ?
Levi H on Jul 30, 2018
BEST ANSWER: The information requested is not available. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
Will these fit with a 6 inch lift?
Derek on Feb 5, 2017
BEST ANSWER: As long as your vehicle lift uses the OE CV axles than these will fit. If your vehicle required a longer axle shaft upon installation of the 6 inch lift, these will not work.

Vehicle Fit

Year Make Model Description
2003-2006Ford Expedition Ford Expedition Pair CV Axle Shaft Front TRQ CSA82443
2004Ford F150 Truck Ford F150 Truck Pair CV Axle Shaft Front New Body Style TRQ CSA82443
2005-2008Ford F150 Truck Ford F150 Truck Pair CV Axle Shaft Front TRQ CSA82443
2006-2008Lincoln Mark LT Lincoln Mark LT Pair CV Axle Shaft Front TRQ CSA82443
2003-2006Lincoln Navigator Lincoln Navigator Pair CV Axle Shaft Front TRQ CSA82443

This part replaces:

  • TRQ CSA82443
  • Hollander 447-02746
  • A1 Cardone 66-2103
  • OE # 2L143A327BD
  • OE # 5L1Z3B436AA
Part #: 1AACS00084

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: CSA82443

How-to Video:

(06:38 min)