Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Front

Specifications

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • CV style axle shafts
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge
  • Correct for models with or without ABS (Anti-Lock Brakes)

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:45)
    • Pry off the hub cap with a flat blade screwdriver
    • Loosen the 35mm hub nut with the vehicle on the ground
    • Loosen the lug nuts
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rotor (1:28)
    • Remove the 17mm bolts from the brake caliper while using an 18mm wrench to hold the inside nut
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off hit the rotor with a ball peen hammer
    • If the rotor still won't come off, thread the bolts into the press holes and slide the rotor off
    • Remove the center hub nut
  3. step : Removing the Axle (2:57)
    • Remove the 15mm bolts from the panel to access the driver side
    • Remove the 15mm bolts from the control arm with a socket, ratchet, and wrench
    • Hammer the upper control arm off the ball joint
    • Pry open the clip and remove the brake line wiring harness
    • Wire-tire the caliper onto the backing plate
    • Remove the two 10mm bolts from the brake line bracket
    • Pull the control arm back from the steering knuckle
    • Place a pry bar onto the back of the axle where it connects to the transmission
    • Hammer the pry bar to push the axle out
    • Place a drip pan underneath the differential
    • Maneuver the axle out of the differential
  4. step : Installing the Axle (6:03)
    • Fit the axle into the hub and then push it into place
    • As you go, place the steering knuckle into the ball joint on the control arm
    • Make sure the axle is locked
    • Replace the brake line bracket
    • Insert and tighten the 10mm bolts to the brake line bracket
    • Re-clip the harness to the brake line
    • Hammer the upper control arm onto the ball joint
    • Replace and tighten the 15mm bolts to the control arm
    • Torque the 15mm bolt to 55 to 60 ft/lbs
  5. step : Installing the Rotor (8:29)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Apply brake grease to the caliper bracket bolts
    • Put the bracket back into place
    • Start the 18mm bolts by hand and tighten them
    • Torque the bolts to 110 ft/lbs of torque
    • Install the new brake pads into the bracket
    • Apply brake grease to the brake pads
    • Put the caliper on
    • Thread the 17mm bolts by hand
    • Torque bolts to 40 ft/lbs
    • Replace the hub nut and remove the lug nut
  6. step : Reattaching the Wheel (10:21)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut
    • Torque the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the hub nut to 103 ft/lbs
    • Reattach the center cap
  7. step : Testing the Brakes (11:19)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands
  • Drain Pan

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 35mm Socket
  • 19mm Socket
  • 17mm Socket
  • 10mm Socket
  • 15mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 18mm Wrench

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Fit perfect and great price.
Everything for as it should. Fast shipping, great price. Cant get any better.
June 30, 2017
Very nice
Very nice quality and new not rebuilt, shipped was right on time , very good price thanks.
September 15, 2018
CV Axle Shaft Pair
Good quality and exact fit would recommend will by from them again
October 17, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do these come with the nuts?
Colter L February 19, 2017
Yes
Patrick A February 19, 2017
Yes, both shafts come with a new locking nut. Just be aware that the new nut is a 36mm vice the stock 35mm so be sure you have the appropriate deep socket impact size ready when reinstalling.
Arnie J February 20, 2017
Yes, The pair I ordered came with new nuts. If the old ones are in good shape, hold on to those to make sure it all works correctly
Thomas F February 22, 2017
Year Make Model Description
2004-2007Buick Rainier Buick Rainier Pair CV Axle Shaft Front TRQ CSA82476
2002-2009Chevy Trailblazer Chevy Trailblazer Pair CV Axle Shaft Front TRQ CSA82476
2002-2006Chevy Trailblazer EXT Chevy Trailblazer EXT Pair CV Axle Shaft Front TRQ CSA82476
2002-2009GMC Envoy GMC Envoy Pair CV Axle Shaft Front TRQ CSA82476
2002-2006GMC Envoy XL GMC Envoy XL Pair CV Axle Shaft Front TRQ CSA82476
2004-2005GMC Envoy XUV GMC Envoy XUV Pair CV Axle Shaft Front TRQ CSA82476
2003-2008Isuzu Ascender Isuzu Ascender Pair CV Axle Shaft Front TRQ CSA82476
2002-2004Oldsmobile Bravada Olds Bravada Pair CV Axle Shaft Front TRQ CSA82476
2005-2009Saab 9-7X Saab 9-7X Pair CV Axle Shaft Front TRQ CSA82476
Part #: 1AACS00087


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: CSA82476

How-to Video:

(11:48 min)