CV Axle Shaft TRQ CSA82125 - 1AACV00144

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit


  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Brand New
    • Not remanufactured
    • No core charge
  • Overall Length: 19-1/2"
  • Direct replacement
  • Built to strict quality control standards

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the CV Axle (0:53)
    • Pry off the center cap with a flat blade screwdriver
    • Pull off the hub dust cover with pliers
    • Remove the 13mm axle nut
    • Have an assistant hold the tire or press the brakes
    • Remove the six 12-point, 12mm bolts that hold the CV axle to the solid axle
  2. step : Disconnecting the Strut (2:10)
    • Remove the 30mm nut bolt from the bottom of the strut
    • Tap the 30mm bolt out with a hammer
    • Pry the strut aside with a pry bar
  3. step : Removing the CV Axle (3:06)
    • Pull the CV axle past the solid axle
    • Pull the CV axle out of the wheel hub
    • Pull the CV axle out past the solid axle
  4. step : Installing the New CV Axle (3:47)
    • Slide the CV Axle into position
    • Slide the CV Axle into the wheel hub
  5. step : Reconnecting the Strut (4:19)
    • Pry the strut into the lower control arm
    • Fasten the 30mm nut and bolt onto the bottom of the strut
    • Tighten the 30mm nut and bolt to between 95 to 100 foot-pounds of torque
  6. step : Reconnecting the CV Axle (4:49)
    • Line up the CV axle with the solid axle
    • Insert the six 12-point, 12mm bolts into the CV Axle
    • Tighten the 12mm bolts to 25 foot-pounds in a crossing or star pattern
    • Fasten the 13mm nut onto the end of the axle
    • Tap on the dust cover with a hammer
    • Push on the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Assistant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 24mm Socket
  • 30mm Socket
  • 13mm Socket
  • 12mm Socket

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
great replacement part
Great replacement part ,order came a day early, packed well, part fit as it should also how to videos are pricless will continue to use 1A Auto
December 20, 2017
Quality parts, perfect fit
My 06 f150 was making loud popping noises while in 4 wheel drive under a load. I assumed it was the actuator for the 4 wheel drive system. After replacing the parts and the noise still there is took the truck to a macanic and learned the transfer case was bad. But the parts from 1a Auto were great.
February 9, 2018
Great product fits perfect!
Well priced and great product fits perfect! Different end but bolt pattern fits perfect. Overall length is correct despite boots being longer. So far so good!
May 3, 2018
Drive axle
Worked as expected. Great product. Great price. Would buy again.
November 11, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I picked up a pair of these from Advanced but they bind. I have read the factory built parts have more bearings therefore do not bind. Do yours have the same amount of bearings so no binding occurs?
Travis W June 14, 2018
I haven’t had a problem out of mine yet.
B D June 14, 2018
I installed the axle shafts on a 2008 f150 4x4. They work great. No binding. Fit together well with wheel hub and transfer case. I never checked regarding if it had the same amount of bearings as the OEM. To me, it doesnt matter as the axles work. I replaced everything from the transfer case to the wheel hub (wheel hub actuators). I also replaced the vacuum lines and solenoid for the 4 wheel system. Purchased all at 1aauto. Came quickly, ordered & works!! I very much appreciated the Tutorial Videos on YouTube by 1aauto ...instruction on installing the parts. That is why I bought from 1aauto..... the help they provided.
Jonathan R June 14, 2018
Didn’t check to see if the number/ size of bearings were same as OEM/Ford. If you have a lift kit installed, I will bet doughnuts to dollars that even the OEM unit will go prematurely due to angle being change. Hope this heps
S T June 14, 2018
Thanks for your question! These are guaranteed to fit and function on the vehicles they are listed for with factory suspension only. Any modification to the suspension will cause axles to not function properly. Thank you!
Adam G June 15, 2018
Year Make Model Description
2003-2006Ford Expedition Ford Expedition Front CV Axle Shaft Driver or Passenger Side TRQ CSA82125
2004Ford F150 Truck Ford F150 Truck New Body Style Front CV Axle Shaft Driver or Passenger Side TRQ CSA82125
2005-2008Ford F150 Truck Ford F150 Truck Front CV Axle Shaft Driver or Passenger Side TRQ CSA82125
2006-2008Lincoln Mark LT Lincoln Mark LT Front CV Axle Shaft Driver or Passenger Side TRQ CSA82125
2003-2006Lincoln Navigator Lincoln Navigator Front CV Axle Shaft Driver or Passenger Side TRQ CSA82125
Part #: 1AACV00144

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: CSA82125

How-to Video:

(06:38 min)