A bad or malfunctioning crankshaft sensor will often cause a service engine light error code, and or cause a no start condition, or rough running due to inaccurate ignition and fuel timing.

Specifications:

  • Brand New Crankshaft Position Sensor
  • Built to strict quality control standards
  • 2-pin connector
  • Direct replacement
  • 100% factory tested
  • Fits models with V6 4.0L Engine only

This is an electrical part and is tested before it leaves our warehouse.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Crankshaft Position Sensor (0:53)
    • Remove the two 8mm bolts from the crankshaft position sensor
    • Pull the sensor forward
    • Compress the wiring harness safety ring
    • Disconnect the sensor wiring harness
    • Pull out the sensor
  2. step : Installing the Crankshaft Sensor (3:22)
    • Put the crankshaft position sensor into place
    • Insert the two 8mm bolts for the sensor
    • Connect the wiring harness
    • Snap on the safety ring

Tools needed for replacement:

    Ratchets & Related

  • 1/4 Inch Ratchet
  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2010 Ford Explorer Crankshaft Position Sensor V6 4.0L
  • 2001-2010 Ford Explorer Sport Trac Crankshaft Position Sensor V6 4.0L
  • 2005-2010 Ford Mustang Crankshaft Position Sensor V6 4.0L
  • 1998-2011 Ford Ranger Crankshaft Position Sensor V6 4.0L
  • 2001-2009 Mazda B4000 Truck Crankshaft Position Sensor
  • 1998-2010 Mercury Mountaineer Crankshaft Position Sensor V6 4.0L

This part replaces:

  • OE # 5L2Z6C315A
  • OE # 1F2267082A
  • OE # 1L2E6C315BB
  • OE # 1L2Z6C315BB
  • OE # 5L2Z6C315BB
  • OE # 1L2Z6C315BA
  • OE # 96TF6C315AB
  • OE # 96TF6C315AA
  • OE # F7TZ6C315AA
  • OE # F87Z6C315AA
  • OE # 1F2267082
  • OE # 1F8267082
  • Standard Motor Products PC250T
  • Wells SU2032
Part #: 1AECS00071

How-to Video:

(04:07 min)