This replacement Crankshaft Position Sensor is just what you need to get your vehicle in good running condition again!

A bad or malfunctioning crank sensor will often cause a service engine light error code, and or cause a no start condition, or rough running due to inaccurate ignition and fuel timing.

Specifications:

  • Direct replacement
  • Replaces dealer part numbers: 5235377, 5269703, MO5235377, MO5269703, MD5235377
  • Built to strict quality control standards
  • 100% factory tested

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Was the exact part I needed $50.00 cheaper than any of the local parts stores.shiping time was good.perfect fit!!Write
May 2, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
How do you install it? Is there an adjustment?
dummy on Jul 1, 2016
BEST ANSWER: I had a 2000 Dodge Stratus. On that car the sensor was located behind the engine above the oil pan. It takes a 10 mm socket or wrench to remove. When I was trying to remove the sensor it crushed on me. If this happens to you, you can drop the oil pan, shine a light on the inside of the engine to see the sensor and push it out. Installation is in reverse. You can also use the internet to locate where the sensor is on your vehicle. Very easy job to do. DON'T GO TO AN AUTO SHOP TO DO THIS. VERY EASY TO DO.

Vehicle Fit

Year Make Model Description
1995-2000Chrysler Cirrus Chrysler Cirrus Crankshaft Position Sensor L4 2.4L (8th Vin Digit X)
2000-2002Chrysler Neon Chrysler Neon Crankshaft Position Sensor L4 2.0L
2001-2002Chrysler PT Cruiser Chrysler PT Cruiser Crankshaft Position Sensor L4 2.4L
1997-1998Chrysler Sebring Chrysler Sebring Crankshaft Position Sensor L4 2.0L
1997-2002Chrysler Sebring Chrysler Sebring Crankshaft Position Sensor L4 2.4L (8th Vin Digit X)
2000-2002Chrysler Voyager Chrysler Voyager Crankshaft Position Sensor L4 2.4L
1998-1999Dodge Avenger Dodge Avenger Crankshaft Position Sensor L4 2.0L
1996-2002Dodge Caravan Dodge Caravan Crankshaft Position Sensor L4 2.4L
1996-1997Dodge Grand Caravan Dodge Grand Caravan Crankshaft Position Sensor L4 2.4L
1998-2002Dodge Neon Dodge Neon Crankshaft Position Sensor L4 2.0L
1995-2002Dodge Stratus Dodge Stratus Crankshaft Position Sensor L4 2.4L (8th Vin Digit X)
1997-1998Eagle Talon Eagle Talon Crankshaft Position Sensor L4 2.0L (8th Vin Digit Y)
1997-1999Mitsubishi Eclipse Mitsubishi Eclipse Crankshaft Position Sensor L4 2.0L (8th Vin Digit Y)
1997-2000Plymouth Breeze Plymouth Breeze Crankshaft Position Sensor L4 2.0L
1997-2000Plymouth Breeze Plymouth Breeze Crankshaft Position Sensor L4 2.4L
1997Plymouth Grand Voyager Plymouth Grand Voyager Crankshaft Position Sensor L4 2.4L
1998-2001Plymouth Neon Plymouth Neon Crankshaft Position Sensor L4 2.0L
1997-2000Plymouth Voyager Plymouth Voyager Crankshaft Position Sensor L4 2.4L

This part replaces:

  • Standard Motor Products PC166T
  • OE # MO5235377
Part #: 1AECS00005


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout