This replacement Crankshaft Position Sensor is just what you need to get your vehicle in good running condition again!

A bad or malfunctioning crank sensor will often cause a service engine light error code, and or cause a no start condition, or rough running due to inaccurate ignition and fuel timing.

This Crank Angle Sensor features:

  • Replaces dealer part numbers: 47810, 56027870, 887008291, 56027870AB
  • 2 Bolt Bracket
  • 3 Pin Connector
  • Direct replacement
  • Built to strict quality control standards
  • 100% factory tested

Your Engine size can usually be found on a white sticker in the engine compartment near the radiator.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Fit perfectly
Replacing the Crank Position Sensor was easier than I thought. 1A sent me the exact fit part, looks just like the OEM part it replaced. Will order form 1A again.
September 20, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Is there a factory spec for the crank positioning sensor Gap?
John D on Aug 15, 2017
BEST ANSWER: We do not have any factory specification, but you may search through a service manual to obtain this. If you view an online automotive forum you may get more details as well by other owners of the same vehicle.

Vehicle Fit

  • 1997-2003 Dodge Dakota Crankshaft Position Sensor V6 3.9L (8th Vin Digit X) Automatic Transmission with
  • 1997-1999 Dodge Dakota Crankshaft Position Sensor V8 5.2L (8th Vin Digit Y) Automatic Transmission with
  • 1998-2003 Dodge Dakota Crankshaft Position Sensor V8 5.9L (8th Vin Digit Z) Automatic Transmission with
  • 1998-1999 Dodge Durango Crankshaft Position Sensor V8 5.9L (8th Vin Digit Z)
  • 1998-1999 Dodge Durango Crankshaft Position Sensor V6 3.9L (8th Vin Digit X)
  • 1998-1999 Dodge Durango Crankshaft Position Sensor V8 5.2L (8th Vin Digit Y)
  • 2000-2003 Dodge Durango Crankshaft Position Sensor V8 5.9L (8th Vin Digit Z) Automatic Transmission with
  • 2000 Dodge Durango Crankshaft Position Sensor V8 5.2L (8th Vin Digit Y) Automatic Transmission with
  • 1997 Dodge Ram 1500 Truck Crankshaft Position Sensor V8 5.2L (8th Vin Digit T) Automatic Transmission with
  • 1997-2001 Dodge Ram 1500 Truck Crankshaft Position Sensor V8 5.2L (8th Vin Digit Y) Automatic Transmission with
  • 1997-2003 Dodge Ram 1500 Truck Crankshaft Position Sensor V8 5.9L (8th Vin Digit Z) Automatic Transmission with
  • 1997-2001 Dodge Ram 1500 Truck Crankshaft Position Sensor V6 3.9L (8th Vin Digit X) Automatic Transmission with
  • 2002 Dodge Ram 1500 Truck Crankshaft Position Sensor V6 3.7L (8th Vin Digit K) Automatic Transmission with
  • 1997-2002 Dodge Ram 2500 Truck Crankshaft Position Sensor V8 5.9L (8th Vin Digit Z) Automatic Transmission with
  • 1997-2002 Dodge Ram 3500 Truck Crankshaft Position Sensor V8 5.9L (8th Vin Digit 5) Automatic Transmission with
  • 1997-2002 Dodge Ram 3500 Truck Crankshaft Position Sensor V8 5.9L (8th Vin Digit Z) Automatic Transmission with
  • 1997-2003 Dodge Van 2500 Crankshaft Position Sensor V8 5.9L (8th Vin Digit Z) Automatic Transmission with
  • 1997-2001 Dodge Van 2500 Crankshaft Position Sensor V6 3.9L (8th Vin Digit X) Automatic Transmission with
  • 1997-2003 Dodge Van 2500 Crankshaft Position Sensor V8 5.2L (8th Vin Digit Y) Automatic Transmission with
  • 1997-2003 Dodge Van 3500 Crankshaft Position Sensor V8 5.9L (8th Vin Digit Z) Automatic Transmission with
  • 1997-2003 Dodge Van 3500 Crankshaft Position Sensor V8 5.2L (8th Vin Digit Y) Automatic Transmission with
  • 1997-2003 Dodge Van 1500 Crankshaft Position Sensor V8 5.2L (8th Vin Digit Y) Automatic Transmission with
  • 1997-2003 Dodge Van 1500 Crankshaft Position Sensor V6 3.9L (8th Vin Digit X) Automatic Transmission with
  • 1997-2003 Dodge Van 3500 Crankshaft Position Sensor V8 5.2L (8th Vin Digit T) Automatic Transmission with
  • 1998-2000 Dodge Van 2500 Crankshaft Position Sensor V8 5.2L (8th Vin Digit 2) Automatic Transmission with
  • 1998-2003 Dodge Van 1500 Crankshaft Position Sensor V8 5.9L (8th Vin Digit Z) Automatic Transmission with
  • 1998-2000 Dodge Van 3500 Crankshaft Position Sensor V8 5.2L (8th Vin Digit 2) Automatic Transmission with
  • 1999-2003 Dodge Van 2500 Crankshaft Position Sensor V8 5.2L (8th Vin Digit T) Automatic Transmission with
  • 1997-1998 Jeep Grand Cherokee Crankshaft Position Sensor V8 5.2L (8th Vin Digit Y)
  • 1998 Jeep Grand Cherokee Crankshaft Position Sensor V8 5.9L (8th Vin Digit Z)

This part replaces:

  • OE # 56027870
  • Standard Motor Products PC127T
Part #: 1AECS00003

Ships Same Day for orders placed by 4 P.M. ET