Corner Light Pair - 1ALPP00016

These replacement corner parking lights are just what you need to get your vehicle in good looking form again!

Specifications:

• Comes as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side)
• Injection molded plastic
• Replaces dealer part numbers: F67Z-13200-AA, F67Z-13201-AA, F67Z13200AA, F67Z13201AA
• DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
• Direct replacements
• Mount to the outsides of the headlights
• Do not include bulbs or wiring

These corner parking lamps are great replacements and have good cost savings over parts from the dealer.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct fit replacement for OEM assembly

Uses same wiring as original assembly.  No cutting or splicing required.

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Remove the parking light (0:53)

• Open the flap over the headlight assembly
• Remove the two Phillips screws at the top of the assembly.
• Pull the parking light out
• Unplug the wiring harness.
• Untwist the light bulb.

step : Install the parking light. (2:45)

• Plug the light bulbs in.
• Connect the wiring harness.
• Insert the parking light assembly.
• Secure the parking light with the Phillips screws.
• Flip the plastic cover back down over the assembly.