This replacement front forward lower control arm is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits RH (Passenger Side) FRONT FORWARD LOWER
  • Replaces dealer part numbers: 4782612AC, 4782612AD, 5180606AA, 5180606AB
  • Cast iron just as original
  • New, not remanufactured or refurbished
  • Control Arm Bushing & Ball Joint are included
  • Correct for RWD (Rear Wheel Drive) Models only
    • Does NOT fit AWD (All Wheel Drive) Models

Worn control arm bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace that heavily rusted, rotted, or damaged front lower control arm with the loose bushings with our high quality all in one replacement.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:56)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:23)
    • Remove the 18mm bolt and washers from the control arm with an 18mm socket and breaker bar and 21mm wrench
    • Loosen the 22mm nut on the bottom of the ball joint with a socket and breaker bar
    • When the nut is flush with the end of the bolt, hit the nut with a hammer
    • Remove the nut with a 6mm Allen key
    • Pull the ball joint up and out
    • Pry the control arm out of the subframe with a pry bar
  3. step : Installing the Control Arm (4:55)
    • Insert the lower control arm into place
    • Insert the 18mm bolt and washers into the control arm but do not tighten all the way
    • Insert the ball joint into the knuckle
    • Push down on the ball joint and tighten the nut, and use an Allen key if necessary
    • Tighten the 21mm ball joint nut to 50 foot-pounds and add 90 degrees
    • Use a jack to push up on the lower control arm to put the weight of the vehicle on the suspension OR
    • Complete step 4 before continuing
    • Torque the 18mm bolt to 130 foot-pounds
    • Remove the jack
  4. step : Reattaching the Wheel (8:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Safety Glasses
  • Gloves

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • 21mm wrench
  • 22mm Wrench

1.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
0
0
0
1
The ball joints came apart
The ball joints came apart. Due to being stuck with out parts I found the joint set for the joint had not been pressed into place. Was able to use hammer to tap/press the metal over to seat the joint into place. Would have sent back or ask for refund, just did not have the option or desire to do the work twice.
November 2, 2017
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Chrysler 300 Rear Wheel Drive Front Lower Forward Control Arm with Ball Joint Passenger Side
  • 2012-2014 Chrysler 300 SRT-8 Front Lower Forward Control Arm with Ball Joint Passenger Side
  • 2008-2010 Dodge Challenger Front Lower Forward Control Arm with Ball Joint Passenger Side
  • 2006 Dodge Charger Front Lower Forward Control Arm with Ball Joint Passenger Side
  • 2007-2010 Dodge Charger Rear Wheel Drive Front Lower Forward Control Arm with Ball Joint Passenger Side
  • 2005-2008 Dodge Magnum Rear Wheel Drive Front Lower Forward Control Arm with Ball Joint Passenger Side

This part replaces:

  • Hollander 512-01473R
  • OE # 5180606AA 5180606AB 4782612AC
  • Dorman 521-122
  • Moog K620257
  • Reference Number MS25121
Part #: 1ASLF00165

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(08:51 min)