These replacement control arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a SET of 4
    • (2) - FRONT UPPER Control Arms - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT FORWARD LOWER Control Arms - LH (Driver Side) & RH (Passenger Side)
  • Complete assemblies
    • Includes ball joints & bushings
  • Direct replacements
  • Built to strict quality control standards
  • Correct for RWD (Rear Wheel Drive) Models only
    • Do NOT fit AWD (All Wheel Drive) Models
NOTE: There has been a redesign on the FRONT UPPER control arms for these models. The control arms must be replaced in pairs if changing from the original factory camber design.

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacements.

One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:53)
    • Loosen the lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Upper Control Arm (1:21)
    • Remove the 19mm nut from the upper control arm ball joint
    • Support the wheel spindle with a bungee cord
    • Tap the wheel spindle with a hammer to loosen the ball joint stud
    • Separate the ball joint from the wheel spindle
    • Open the hood
    • If you are working on the driver side, release the power steering reservoir tab
    • Move the power steering reservoir aside
    • Remove the two 10mm bolts from the coolant reservoir
    • Move the coolant reservoir aside
    • Open the brake fluid reservoir door
    • Remove the two 18mm control arm bolts from the strut tower
    • Pull out the two captured bolts that hold the control arm to the wheel well
    • Pull the control arm down and out
  3. step : Installing the Control Arm and Wheel (6:23)
    • Lift the control arm into place
    • Insert the two bolt that hold the control arm to the wheel well
    • Insert the ball joint stud into the wheel spindle
    • Start the 19mm nut onto the ball joint stud
    • Tighten the 19mm nut to 35 foot-pounds of torque
    • Turn the 19mm nut 90 degrees farther
    • Remove the bungee cord from the wheel spindle
    • Slide on the wheel
    • Start the lug nuts
    • Lower the vehicle to put weight on the suspension
    • Fasten the 18mm nuts onto the control arm bolts at the strut tower
    • Torque the 18mm nuts to 55 foot-pounds
    • Close the brake reservoir access door, If you worked on the driver's side
    • Put the coolant reservoir into place
    • Insert the two 10mm bolts for the coolant reservoir
    • Clip the power steering reservoir onto the coolant reservoir
    • Close the hood
    • Tighten the lug nuts to 110 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

4.9 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
7
1
0
0
0
Perfect OEM swap out
Upper and lower control arms were a perfect fit and easy OEM swap out. Thanks!
April 17, 2018
Purchased
2 months ago
Service you can count on
Parts ordered, they were in stock, shipped out the next day, received in a timely manner. Service is more than a great price, i will definitely use 1a auto for my future auto parts needs
April 17, 2018
Purchased
2 months ago
Great product and price!!!
I searched to internet to compare the 1A Auto pricing, but they simply cannot be beat. The parts that I ordered were an exact match and I was able to put them on using the tutorial videos. This was a terrific alternative to expensive OEM parts and Dodge technician repair work. Thank you so much!!!
October 29, 2017
Purchased
7 months ago
great product
Did exactly what it was purchased for. Great quality and also the best price for all four pieces. Local Orielly's and AutoZone could not compare. Thanks
July 24, 2017
Purchased
11 months ago
So very satisfied!
Im am so very happy I found you guys online! I was quoted over $200 dollars to replace one lower ball joint.I ordered the upper and lower control arms for the left side and right side with all the ball joints and bushings for my Chrysler 300c,and was only $130 something dollars!And did all the work myself by watching your "How to videos"!Saved a whole lot of money!And it was free shipping!Thank you guys so much!You guys are awesome!Thanks Again!
July 5, 2017
Purchased
1 year ago
I got the parts quick and the fit perfect and I will buy again from you
July 4, 2017
Purchased
11 months ago
05 Dodge Magnum
I Purchased some control arms for each side of my 05 Magnum for the front. Since installing them my car rides smooth and the product is of good quality holding up well. I would recommend anyone to purchase from you and the prices is great. I look forward to ordering from again soon.
June 29, 2017
Purchased
1 year ago
Happy
So happy I found your web site. Prices, professional techs when calling in and speedy delivery service. Really HAPPY!
June 18, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
What material is it?
Choko on Nov 16, 2016
BEST ANSWER: These will come exactly as your originals.

Vehicle Fit

  • 2005-2010 Chrysler 300 Rear Wheel Drive Front Upper & Lower Forward Control Arm with Ball Joint 4 Piece Set
  • 2012-2013 Chrysler 300 SRT-8 Front Upper & Lower Forward Control Arm with Ball Joint 4 Piece Set V8 6.4L
  • 2008-2013 Dodge Challenger Front Upper & Lower Forward Control Arm with Ball Joint 4 Piece Set
  • 2006 Dodge Charger Front Upper & Lower Forward Control Arm with Ball Joint 4 Piece Set
  • 2007-2013 Dodge Charger Rear Wheel Drive Front Upper & Lower Forward Control Arm with Ball Joint 4 Piece Set
  • 2005-2008 Dodge Magnum Rear Wheel Drive Front Upper & Lower Forward Control Arm with Ball Joint 4 Piece Set

This part replaces:

  • OE # 4782666AB
  • OE # 4782665AB
  • OE # 4782613AC
  • OE # 4782613AD
  • OE # 5180607AA
  • OE # 5180607AB
  • OE # 4782612AC
  • OE # 4782612AD
  • OE # 5180606AA
  • OE # 5180606AB
  • Hollander 511-01107R
  • Hollander 511-01108L
  • Hollander 512-01473R
  • Hollander 512-01474L
  • Dorman 521-007
  • Dorman 521-008
  • Dorman 521-121
  • Dorman 521-122
  • Reference Number MS25120
  • Reference Number MS25121
  • Moog K620177
  • Moog K620178
  • Moog K620257
  • Moog K620258
Part #: 1ASFK01859


How-to Video:

(09:43 min)