Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT LOWER
  • Arms include both bushings and ball joints
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    It is recommended to seek a professional alignment after completing this repair.

  1. step : Removing the Wheel (0:58)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Control Arm (1:20)
    • Loosen the ball joint bolt with a 15mm wrench and a 16mm socket and ratchet
    • Remove the 18mm bolt in the front of the control arm with a socket, ratchet, and pipe for leverage
    • Remove the two 18mm bolts in the large control arm bushing
    • Remove the bolt on the end of the bushing
    • Pry the front of the control arm out with a pry bar
    • Pry out the back bushing with a pry bar
    • Pull the control arm down and out
  3. step : Installing the Front Control Arm (3:29)
    • Insert the ball joint in place
    • Tighten the 16mm bolt in the ball joint by hand
    • Feed the rear part of the control arm and the front part into the frame
    • Hammer the ball joint into place to line it up
    • Tighten the 18mm bolts by hand
    • Tighten the bolt on the end of the bushing by hand
    • Tighten the 18mm bolts on the control arm bushing with a socket and wrench
    • Torque the bolts between 75 and 85 foot-pounds
    • Torque the ball joint bolt to 50 foot-pounds
    • Place a jack underneath the lower ball joint to lift the suspension up until there's just weight off the jack stand
    • Tighten the rear bushing bolt to 55 foot-pounds of torque and the front 18mm bolt to 75 foot-pounds
  4. step : Reattaching the Wheel (5:41)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 18mm Wrench

5.0 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
0
0
0
0
Good product great prices
I was very pleased with the parts I purchased and even more pleased with the price. It's hard to find dependable parts with a cost that furr's your budget.
July 22, 2018
Purchased
1 month ago
Control arms with ball joints
The product was shipped swiftly and securely and was exactly what I ordered. The control arms are working perfectly and the video provided by your company made installation simple. I have already recommended your company to others.
June 11, 2018
Purchased
3 months ago
AWESOME
I HAVE ALWAYS HAD A GREAT, EASY EXPERIENCE WITH A-1
THE WEBSITE IS EASY TO NAVAGATE AROUND AND TO PURCHASE WITH EASE. I REALLY LIKE THE BIG BOLD FONT.
YOUR PRICING IS UN BEATABLE BY FAR.
May 21, 2018
Purchased
3 months ago
Great Parts
This pair of Control Arms with Ball Joint look well made and install as hoped for with this job. 1A is a great source for parts.
February 23, 2018
Purchased
11 months ago
Fair Price, Quality Product
Excellent customer service! Product was delivered on schedule as promised. Completely blew the competition away on price/quality.
February 23, 2018
Purchased
8 months ago
Order review
A 1 as expected delivers both parts and excellent customer service as needed and over night as promised,thanks again always my first choice for car part needs. Dan Whitney
April 22, 2017
Perfect fit ease of install with video step by step
Perfect fit ease of install with video step by step Would definitely recommend
April 22, 2017
Purchased
1 year ago
Worked Great
This control arm fit perfectly on my '07 Pontiac G6 and the installation video was very helpful. As a note though, the engine in the video is a 4 cylinder. The V6 engine is mounted on the outside of the frame right next to the control arm. To remove the forward control arm bolt the engine must be jacked up so the engine mount can be removed. Still easy to do, just adds a few more minutes of work.
April 3, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 6 answers
Will this fit a 06 g6 gtp 3.9L?
Josh J on Nov 7, 2017
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
how much do these control arms weigh?
jenna r on Aug 21, 2017
BEST ANSWER: An estimated weight for each of these control arms is 8 - 9 pounds.
how much do these control arms weigh?
jenna r on Aug 21, 2017
BEST ANSWER: These will weight an estimate of 8 - 9 pounds.
will this fit 07 g6 GT. 3.9?
ronald r on Jul 9, 2017
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
How long for standard shipping?
biedronn on Jun 19, 2017
BEST ANSWER: Based on your location, our ground shipping takes 3 to 5 business days to deliver.
What brand is this?
biedronn on Jun 19, 2017
BEST ANSWER: This is our 1A Auto brand which are made to meet or exceed the OE specifications and backed using a limited lifetime warranty as long as you own the vehicle.

Vehicle Fit

Year Make Model Description
2004-2005Chevy Malibu Chevy Malibu New Body Style Front Lower Control Arm with Ball Joint Pair
2006-2012Chevy Malibu Chevy Malibu Front Lower Control Arm with Ball Joint Pair
2004-2007Chevy Malibu Maxx Chevy Malibu Maxx Front Lower Control Arm with Ball Joint Pair
2005-2010Pontiac G6 Pontiac G6 Front Lower Control Arm with Ball Joint Pair
2007-2009Saturn Aura Saturn Aura Front Lower Control Arm with Ball Joint Pair

This part replaces:

  • Moog K620179
  • Moog K620180
  • Dorman 520-163
  • Dorman 520-164
  • Hollander 512-01416L
  • Hollander 512-01415R
  • OE # 22730775, 22730776
Part #: 1ASFK00182


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:36 min)