Control Arm with Ball Joint Pair - 1ASFK00636

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

These replacement front upper control arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT UPPER
  • Replaces dealer part numbers: 4782666AB, 4782665AB
  • Complete assemblies
    • Includes ball joints & bushings
  • Direct replacements
  • Built to strict quality control standards
NOTE: There has been a redesign on the control arms for these models. The control arms must be replaced in pairs if changing from the original factory camber design.

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacements.

One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:53)
    • Loosen the lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Upper Control Arm (1:21)
    • Remove the 19mm nut from the upper control arm ball joint
    • Support the wheel spindle with a bungee cord
    • Tap the wheel spindle with a hammer to loosen the ball joint stud
    • Separate the ball joint from the wheel spindle
    • Open the hood
    • If you are working on the driver side, release the power steering reservoir tab
    • Move the power steering reservoir aside
    • Remove the two 10mm bolts from the coolant reservoir
    • Move the coolant reservoir aside
    • Open the brake fluid reservoir door
    • Remove the two 18mm control arm bolts from the strut tower
    • Pull out the two captured bolts that hold the control arm to the wheel well
    • Pull the control arm down and out
  3. step : Installing the Control Arm and Wheel (6:23)
    • Lift the control arm into place
    • Insert the two bolt that hold the control arm to the wheel well
    • Insert the ball joint stud into the wheel spindle
    • Start the 19mm nut onto the ball joint stud
    • Tighten the 19mm nut to 35 foot-pounds of torque
    • Turn the 19mm nut 90 degrees farther
    • Remove the bungee cord from the wheel spindle
    • Slide on the wheel
    • Start the lug nuts
    • Lower the vehicle to put weight on the suspension
    • Fasten the 18mm nuts onto the control arm bolts at the strut tower
    • Torque the 18mm nuts to 55 foot-pounds
    • Close the brake reservoir access door, If you worked on the driver's side
    • Put the coolant reservoir into place
    • Insert the two 10mm bolts for the coolant reservoir
    • Clip the power steering reservoir onto the coolant reservoir
    • Close the hood
    • Tighten the lug nuts to 110 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

5.00/ 5.0
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Upper Control Arms
I purchased a pair of upper control arms with ball joints for my 2005 Chrysler 300 Touring. The parts were a perfect fit, and easy to install.
March 16, 2017
Ball joints
Fast shipping and great service! Good parts will continue to shop here,thank you.
July 26, 2017
Parts fit great and work awesome!
I ordered these for my 06 Chrysler 300C RWD and my mechanic said that they installed easy and work fine. My car rides MUCH better and the clunking is all gone. Good service too from 1A Auto!
August 8, 2017
Been with you for years
The last purchase was great per usual. Even if there is ever an issue ( it happens)!A Auto goes above and beyond to make sure the customer is happy. Another great experience!
December 31, 2017
Control Arms
This control arm is a control arm. It makes sure your wheel doesnt fall off. So far, my wheels are still on so Id say its a win.
January 18, 2018
Fits perfectly!
Good quality item, fit perfectly. Replaced 170000 mile pair on my 06 Charger RT. Price is unbeatable for the product. Fast delivery, Recommended over the stealer and more economical than the chain automotive parts stores.
February 4, 2018
Control arm purchase
The part I received was just what I needed for my car. It came in the time stated and if fit. thanks again for your timely shipping.
April 23, 2018
Great Replacement Parts
Thankfully there was a video that also made this install easier than it could have been
July 25, 2018
Excellent delivery service.outstanding customer service. High quality parts that fit the first time. Very friendly website and easy to order. Will now only use 1A Auto and not Rock auto anymore. Customer for LIFE.
November 27, 2018
The product was great fit perfectly and had little plastic caps to protect the threads camber not out at all cant beat the price or a quality
November 28, 2018
Good Quality
Perfect fit to replace my stock control arms on my SRT8. The parts arrived quickly and Undamaged.
December 4, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do I need to grease new upper control arm with lubricant?
Michael D November 1, 2017
No need
Steven Z November 1, 2017
Only if they have grease fittings on them.
Erik S November 1, 2017
Maxwell T January 18, 2018
M R November 28, 2018
Wil these upper control arms fit a 2012 challenger r/t ?
Raymond B January 18, 2018
Yes, according to the information you supplied, the part you’re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Adam G January 18, 2018
Year Make Model Description
2005-2017Chrysler 300 Chrysler 300 Front Upper Control Arm with Ball Joint Pair Rear Wheel Drive
2008-2017Dodge Challenger Dodge Challenger Front Upper Control Arm with Ball Joint Pair
2006Dodge Charger Dodge Charger Front Upper Control Arm with Ball Joint Pair
2007-2017Dodge Charger Dodge Charger Front Upper Control Arm with Ball Joint Pair Rear Wheel Drive
2005-2008Dodge Magnum Dodge Magnum Front Upper Control Arm with Ball Joint Pair Rear Wheel Drive
Part #: 1ASFK00636

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:43 min)