These replacement front upper control arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT UPPER
  • Replaces dealer part numbers: 51450-SR0-A02, 51450-SR3-023, 51450-ST7-020, 51460-SR0-A02, 51460-SR3-023, 51460-ST7-020, 51450SR0A02, 51450SR3023, 51450ST7020, 51460SR0A02, 51460SR3023, 51460ST7020
  • Complete assemblies
    • Includes ball joints and bushings
  • Direct replacements
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacements.

One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Is the nuts next to the bushing that help swivel suppose to be loose or tight?
Danny G on Mar 5, 2017
BEST ANSWER: If you are talking about the nuts that are on the studs that are loose when you get them then yes.But when you put them on the car all nuts should be tight.I hope that helps you out.

.
What size are the nuts?
Danny G on Mar 5, 2017
BEST ANSWER: At this time we do not have the size of the mounting hardware available, but are built to the OE specifications. You may speak with a dealership to verify the sizing of the mounting hardware to be certain if some of it needs to be replaced on your vehicle.

Vehicle Fit

  • 1994-2001 Acura Integra Front Upper Control Arm with Ball Joint Pair
  • 1992-1995 Honda Civic Front Upper Control Arm with Ball Joint Pair
  • 1993-1997 Honda Civic Del Sol Front Upper Control Arm with Ball Joint Pair

This part replaces:

  • Dorman 520-676
  • Hollander 511-58084R
  • Hollander 511-58083R
  • Hollander 511-58075R
  • OE # 51450SR3023
  • OE # 51450ST7020
  • OE # 51450SR3A02
  • OE # 51450SR0A02
  • OE # 51450SR3003
  • OE # 51450SR3013
  • Hollander 511-58084L
  • Hollander 511-58083L
  • Hollander 511-58075L
  • OE # 51460SR3023
  • OE # 51460ST7020
  • OE # 51460SR3A02
  • OE # 51460SR0A02
  • OE # 51460SR3003
  • OE # 51460SR3013
  • Dorman 520-675
  • Moog K90448
  • Moog K90449
Part #: 1ASFK00379


Order must be placed by 4pm ET