Part Details

  • Quantity: Pair

These replacement front forward lower control arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver) & RH (Passenger Sides) FRONT FORWARD LOWER
  • Replaces dealer part numbers: 4782613AC, 4782613AD, 5180607AA, 5180607AB, 4782612AC, 4782612AD, 5180606AA, 5180606AB
  • Cast iron just as original
  • New, not remanufactured or refurbished
  • Control Arm Bushings & Ball Joints are included
  • Correct for RWD (Rear Wheel Drive) Models only
    • Do NOT fit AWD (All Wheel Drive) Models

Worn control arm bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace those heavily rusted, rotted, or damaged front lower control arms with the loose bushings with our high quality all in one replacements.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:56)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:23)
    • Remove the 18mm bolt and washers from the control arm with an 18mm socket and breaker bar and 21mm wrench
    • Loosen the 22mm nut on the bottom of the ball joint with a socket and breaker bar
    • When the nut is flush with the end of the bolt, hit the nut with a hammer
    • Remove the nut with a 6mm Allen key
    • Pull the ball joint up and out
    • Pry the control arm out of the subframe with a pry bar
  3. step : Installing the Control Arm (4:55)
    • Insert the lower control arm into place
    • Insert the 18mm bolt and washers into the control arm but do not tighten all the way
    • Insert the ball joint into the knuckle
    • Push down on the ball joint and tighten the nut, and use an Allen key if necessary
    • Tighten the 21mm ball joint nut to 50 foot-pounds and add 90 degrees
    • Use a jack to push up on the lower control arm to put the weight of the vehicle on the suspension OR
    • Complete step 4 before continuing
    • Torque the 18mm bolt to 130 foot-pounds
    • Remove the jack
  4. step : Reattaching the Wheel (8:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Safety Glasses
  • Gloves

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • 21mm wrench
  • 22mm Wrench

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Happy Vehicle
Thanks to you’re video installation was a breeze,
I will always keep you guys at the top of my list for all my needs. Truly (5) Stars
September 14, 2018
Purchased
1 month ago
Highly recommend this company for any parts needed. I ordered some swaybar links and they were the best quality parts I've ever purchased online. Easy and quick installation as well. Thanks a lot and I'll definitely be ordering again.
April 3, 2018
Purchased
7 months ago
Fast shipping perfect fit, best pricing.
Fit my 2006 Charger perfectly. Recommend 1aauto for replacement parts. High quality bushing material.
January 8, 2018
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
What brand are these chaises parts?
Giovanni C on Apr 6, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 Rear Wheel Drive Front Lower Forward Control Arm with Ball Joint Pair
2012-2014Chrysler 300 Chrysler 300 SRT-8 Front Lower Forward Control Arm with Ball Joint V8 6.4L Pair
2008-2010Dodge Challenger Dodge Challenger Front Lower Forward Control Arm with Ball Joint Pair
2006Dodge Charger Dodge Charger Front Lower Forward Control Arm with Ball Joint Pair
2007-2010Dodge Charger Dodge Charger Rear Wheel Drive Front Lower Forward Control Arm with Ball Joint Pair
2005-2008Dodge Magnum Dodge Magnum Rear Wheel Drive Front Lower Forward Control Arm with Ball Joint Pair

This part replaces:

  • Hollander 512-01473R
  • Hollander 512-01474L
  • Dorman 521-122
  • Dorman 521-121
  • Moog K620258
  • Moog K620257
  • OE # 5180606AA
  • OE # 5180607AB
  • OE # 5180606AB
  • OE # 4782613AC
  • OE # 4782612AC
Part #: 1ASFK00170


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:50 min)