Part Details

  • Quantity: Pair
  • Front or Rear Location: Front
  • Location: Lower

Specifications:

  • Comes as a Pair
  • Includes both LH (Driver Side) & RH (Passenger Side) Front Lower
  • Includes new bushings
  • Direct replacement

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:40)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:13)
    • Turn the wheel by hand
    • Hold the nut at the top of the sway bar link with a 13mm wrench
    • Loosen the sway bar link bolt with a 13mm socket and ratchet
    • Apply penetrating oil to the bolt if necessary
    • Make note of the positions of the bushings and washers
    • Tap the bolt out with a hammer
  3. step : Installing the New Sway Bar Link (2:36)
    • Place a rubber bushing on the control arm
    • Put on a washer
    • Put on the metal sleeve
    • Lift the sway bar with a pry bar
    • Put a rubber bushing on top of the metal sleeve
    • Put a washer and a rubber bushing onto the bolt
    • Slide the bolt into place
    • Put a rubber bushing on the bolt, on top of the way bar
    • Put on a washer
    • Thread on the nut
    • Hold the nut at the top of the sway bar link with a 14mm wrench
    • Tighten the sway bar link bolt with a 14mm socket and ratchet
  4. step : Reattaching the Wheel (4:10)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap, lining up the notch with the valve stem
    • Tighten the lug nut covers with a 22mm socket

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 14mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 14mm Wrench

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Satisfied customer
I have ordered multiple times from a1 Auto and have been satisfied to my expectations I would and have recommended this site to numerous people n my community not much bad to say about this company if I had anything negative to say would be package shippment and time delivery wasn't exact but other then a+ thank u a1 auto
April 14, 2018
Purchased
6 months ago
Way cheaper than autozone!!!
Came in really quick and was able to save hundreds on parts!!!
April 9, 2018
Purchased
7 months ago
Great price on the exact parts I needed
I bought my parts from 1A Auto this time because they've saved my bacon so many times with their great How-To videos, I felt it was time I said thank you. So, I gave them my business. Their price was competitive and the Customer Service was exceptional. I will use them again. Thank you 1A Auto.
November 29, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2002-2007Buick Rendezvous Buick Rendezvous Lower Control Arm with Ball Joint Pair Front
1998Chevy Lumina Chevy Lumina Police & Taxi Models Lower Control Arm with Ball Joint Pair Front
1998-1999Chevy Monte Carlo Chevy Monte Carlo Police & Taxi Models Lower Control Arm with Ball Joint Pair Front
2001-2005Pontiac Aztek Pontiac Aztek Lower Control Arm with Ball Joint Pair Front

This part replaces:

  • Hollander 512-01198R, 512-01288R
  • Moog RK621352
  • Hollander 512-01198L, 512-01289L
  • Moog RK621351
  • Moog K621351
  • Moog K621352
  • Dorman 521-639
  • Dorman 521-640
  • OE # 10402115
  • OE # 10413557
  • OE # 10318097
  • OE # 10318098
Part #: 1ASFK02121


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:01 min)