Replaces

Control Arm with Ball Joint Driver Side Front - 1ASLF00679

Part Details

  • Side Location: Driver Side
  • Front or Rear Location: Front
  • Location: Lower

Specifications:

  • Fits LH (Driver Side) Front Lower
  • Includes new bushings
  • Direct replacement

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:40)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:13)
    • Turn the wheel by hand
    • Hold the nut at the top of the sway bar link with a 13mm wrench
    • Loosen the sway bar link bolt with a 13mm socket and ratchet
    • Apply penetrating oil to the bolt if necessary
    • Make note of the positions of the bushings and washers
    • Tap the bolt out with a hammer
  3. step : Installing the New Sway Bar Link (2:36)
    • Place a rubber bushing on the control arm
    • Put on a washer
    • Put on the metal sleeve
    • Lift the sway bar with a pry bar
    • Put a rubber bushing on top of the metal sleeve
    • Put a washer and a rubber bushing onto the bolt
    • Slide the bolt into place
    • Put a rubber bushing on the bolt, on top of the way bar
    • Put on a washer
    • Thread on the nut
    • Hold the nut at the top of the sway bar link with a 14mm wrench
    • Tighten the sway bar link bolt with a 14mm socket and ratchet
  4. step : Reattaching the Wheel (4:10)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap, lining up the notch with the valve stem
    • Tighten the lug nut covers with a 22mm socket

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 14mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 14mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great product
Parts were everything they said they would be. Would recommend
February 12, 2017
Purchased
over 2 years ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2002-2007Buick Rendezvous Buick Rendezvous Front Lower Driver Side Control Arm with Ball Joint
1998Chevy Lumina Chevy Lumina Front Lower Driver Side Control Arm with Ball Joint Police & Taxi Models
1998-1999Chevy Monte Carlo Chevy Monte Carlo Front Lower Driver Side Control Arm with Ball Joint Police & Taxi Models
2001-2005Pontiac Aztek Pontiac Aztek Front Lower Driver Side Control Arm with Ball Joint

This part replaces:

  • Reference Number CB91003
  • Hollander 512-01198L, 512-01289L
  • Moog RK621351
  • Moog K621351
  • Dorman 521-639
  • OE # 10402115
  • OE # 10318097
Part #: 1ASLF00679


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:01 min)