Replaces

Control Arm with Ball Joint Driver or Passenger Side Front - 1ASFU00041

Part Details

  • Side Location: Driver or Passenger Side
  • Front or Rear Location: Front
  • Location: Upper

This replacement front upper control arm is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT UPPER
  • Replaces dealer part number: 15864153
  • Includes new ball joint & control arm bushings
  • Control arm is new, not remanufactured or refurbished

Note: For 2007 Pickup Truck models, the Classic Style truck will have a crease in the center of the door skin, where the new style will have a smooth skin. The control arm listed here is for the Classic style truck.

Worn control arm bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace that heavily rusted, rotted, or damaged front upper control arm with the loose bushings with our high quality all in one replacement.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    NOTE: After completing the procedure you will need a professional alignment

  1. step : Removing the Wheel (0:47)
    • Loosen the 22mm caps on the hubcap with the vehicle on the ground
    • Pull the hubcap free
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Upper Control Arm (1:10)
    • Mark the tab on the adjustment piece with a marker to mark the alignment
    • Remove the two 10mm bolts holding the brake line and move the brackets
    • Remove the ball joint nut with an 18mm wrench
    • Hit the wheel knuckle and control arm to break them free
    • Remove the 21mm nuts from the upper control arm bracket
    • Jack up the wheel underneath the wheel knuckle
    • Remove the upper control arm nut
    • Remove the bolts and upper control arm bracket
    • Place a nut back on and use an air hammer to knock the bolt out if it won't budge
    • Move the control arm up and down while pulling out
  3. step : Installing the Upper Control Arm (3:52)
    • Put the upper control arm into place and push the 21mm bolts in to hold it
    • Put the brackets on either side and realign them up
    • Angle the control arm down into the wheel knuckle
    • Replace the 18mm ball joint nut
    • Replace the 21mm nuts from the upper control arm bracket
    • Replace and tighten the two 10mm bolts
    • Put a grease gun into place on the end of the control arm and fill it up
  4. step : Reattaching the Wheel (6:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the hubcap and tighten the caps

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 18mm Wrench
  • 21mm wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Very satisfied fast delivery and good part
This is the first time i have ever ordered from A1. I am very satisfied with their service I received the part in 3 days and it was an excellent quality part I ordered a upper control arm with ball joint. I would definitely order from them again and would recommend them to anyone
July 7, 2018
Purchased
3 months ago
Great Price and Identical fit
I installed the new control arm and it enhance my driving experience back to the factory standard. Don't need anything but I am checking for more parts to purchase from you guys. Your service is always timely and on time. And your how to videos really save me time and money. Thank you 1aauto for your dedicated service in making my time for repairs a pleasant experience.
April 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
What are the torque specs for the front upper control arm?
Rowdy B on Oct 2, 2016
BEST ANSWER: I don't think you have to torque them. Just make sure they are tight because you will need to take it for an alignment after. That's what I did anyway

Vehicle Fit

Year Make Model Description
2002-2006Cadillac Escalade Cadillac Escalade Front Upper Control Arm with Ball Joint Driver or Passenger Side
2003-2006Cadillac Escalade ESV Cadillac Escalade ESV Front Upper Control Arm with Ball Joint Driver or Passenger Side
2002-2006Cadillac Escalade EXT Cadillac Escalade EXT Front Upper Control Arm with Ball Joint Driver or Passenger Side
2002-2006Chevy Avalanche 1500 Chevy Avalanche 1500 Front Upper Control Arm with Ball Joint Driver or Passenger Side
2003-2014Chevy Express 1500 Van Chevy Express 1500 Van Front Upper Control Arm with Ball Joint Driver or Passenger Side
2003-2005Chevy Express 2500 Van Chevy Express 2500 Van 7300LB GVW Front Upper Control Arm with Ball Joint Driver or Passenger Side
1999-2000Chevy Silverado 1500 Chevy Silverado 1500 Front Upper Control Arm with Ball Joint Driver or Passenger Side
2001-2003Chevy Silverado 1500 Chevy Silverado 1500 Front Upper Control Arm with Ball Joint Driver or Passenger Side (excluding Crew Cab)
2004-2006Chevy Silverado 1500 Chevy Silverado 1500 Front Upper Control Arm with Ball Joint for Models with 6 Lug Wheels Driver or Passenger Side
2007Chevy Silverado 1500 Classic Chevy Silverado 1500 Classic Front Upper Control Arm with Ball Joint for Models with 6 Lug Wheels Driver or Passenger Side
2000-2006Chevy Suburban 1500 Chevy Suburban 1500 Front Upper Control Arm with Ball Joint Driver or Passenger Side
2000Chevy Tahoe Chevy Tahoe Front Upper Control Arm with Ball Joint Driver or Passenger Side (excluding Z71 Models)
2001-2006Chevy Tahoe Chevy Tahoe Front Upper Control Arm with Ball Joint Driver or Passenger Side
2003-2014GMC Savana 1500 Van GMC Savana 1500 Van Front Upper Control Arm with Ball Joint Driver or Passenger Side
2003-2005GMC Savana 2500 Van GMC Savana 2500 Van 7300LB GVW Front Upper Control Arm with Ball Joint Driver or Passenger Side
1999-2000GMC Sierra 1500 GMC Sierra 1500 Front Upper Control Arm with Ball Joint Driver or Passenger Side
2001-2003GMC Sierra 1500 GMC Sierra 1500 Front Upper Control Arm with Ball Joint Driver or Passenger Side (excluding Crew Cab)
2004-2006GMC Sierra 1500 GMC Sierra 1500 Front Upper Control Arm with Ball Joint for Models with 6 Lug Wheels Driver or Passenger Side
2007GMC Sierra 1500 Classic GMC Sierra 1500 Classic Front Upper Control Arm with Ball Joint for Models with 6 Lug Wheels Driver or Passenger Side
2000GMC Yukon GMC Yukon Front Upper Control Arm with Ball Joint Driver or Passenger Side (excluding Denali Models)
2001-2006GMC Yukon GMC Yukon Front Upper Control Arm with Ball Joint Driver or Passenger Side
2000-2006GMC Yukon XL 1500 GMC Yukon XL 1500 Front Upper Control Arm with Ball Joint Driver or Passenger Side

This part replaces:

  • Hollander 511-01044
  • Dorman 520-116
  • Moog K80942
  • OE # 15864153
  • OE # 15047200
  • OE # 12475485
Part #: 1ASFU00041


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:07 min)