Control Arm Front - 1ASFK00988

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set
  • Front or Rear Location:   Front
  • Location:   Lower

These replacement front control arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.


  • Control Arm Kit Includes:
    • (2) - LH (Driver Side) & RH (Passenger Side) FRONT LOWER REARWARD CONTROL ARM
    • (2) - LH (Driver Side) & RH (Passenger Side) FRONT LOWER FORWARD CONTROL ARM with BALL JOINT
  • Replaces dealer part numbers: 4782612AC, 4782613AC, 4782612AD, 4782613AD, 5180606AA, 5180607AA, 5180606AB, 5180607AB, 68002123AC
  • Complete assemblies
  • Direct replacements
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacements.

One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:56)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:23)
    • Remove the 18mm bolt and washers from the control arm with an 18mm socket and breaker bar and 21mm wrench
    • Loosen the 22mm nut on the bottom of the ball joint with a socket and breaker bar
    • When the nut is flush with the end of the bolt, hit the nut with a hammer
    • Remove the nut with a 6mm Allen key
    • Pull the ball joint up and out
    • Pry the control arm out of the subframe with a pry bar
  3. step : Installing the Control Arm (4:55)
    • Insert the lower control arm into place
    • Insert the 18mm bolt and washers into the control arm but do not tighten all the way
    • Insert the ball joint into the knuckle
    • Push down on the ball joint and tighten the nut, and use an Allen key if necessary
    • Tighten the 21mm ball joint nut to 50 foot-pounds and add 90 degrees
    • Use a jack to push up on the lower control arm to put the weight of the vehicle on the suspension OR
    • Complete step 4 before continuing
    • Torque the 18mm bolt to 130 foot-pounds
    • Remove the jack
  4. step : Reattaching the Wheel (8:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Safety Glasses
  • Gloves

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • 21mm wrench
  • 22mm Wrench

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Express Lane
I felt like I was their only customer and their sole attention was on me. I received my parts in a timely and extremely professional manner. Parts are superior. Thank you 1Aauto
May 16, 2018
Convenient and cost effective!
While working on my wife’s car I decided after 140,000 miles, I would rebuild the front end of the car. I checked some other parts web sites and found none that sold the parts needed in sets( pass and drivers side). It made the ordering much easier and with free shipping and an already low price, it couldn’t be beat! I received the parts within 4 days and the quality of the parts were just like OE . This was my first purchase from A1, but it won’t be my last!!
September 13, 2018
2008 Dodge Charger fix
Well the 08 charger finally needed some repair work done to it thanks to these Chicago streets. Took it to the mechanics and they gave me a quote for 800 to change the lower control arm and sway bar bushings. I decided to buy the parts from 1a auto and do it myself with help of the video from the website. Took me less than an hour to fix saving me money. Thanks 1A auto for the fast shipping and videos you guys post.
November 7, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will this fit my 300c 5.7 All Wheel Drive. Even though its a rear wheel product?
Osbaldo G August 19, 2016
No this will only fit rear wheel applications.
Derek C August 19, 2016
Excuse me dou you sell the large bolts that go through the control arm?
J P June 9, 2017
At this time we do not offer any mounting hardware. If you are unable to re use the existing hardware you may find the specifications for the bolts through a dealership and purchase elsewhere.
Alex P June 9, 2017
Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 Front Lower Control Arm 4 Piece Set Rear Wheel Drive
2008-2010Dodge Challenger Dodge Challenger Front Lower Control Arm 4 Piece Set
2006Dodge Charger Dodge Charger Front Lower Control Arm 4 Piece Set
2007-2010Dodge Charger Dodge Charger Front Lower Control Arm 4 Piece Set Rear Wheel Drive
2005-2008Dodge Magnum Dodge Magnum Front Lower Control Arm 4 Piece Set Rear Wheel Drive
Part #: 1ASFK00988

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:50 min)