This automatic transmission conductor plate is just what you need to get your vehicle driving correctly again!

This conductor plate is the electro-hydraulic control unit that controls valve body operation. This unit mounts to the valve body and incorporates the input speed sensor. If this sensor fails, you must replace the conductor plate.

Specifications:

  • Brand New Transmission Conductor Plate
  • Direct replacement
  • Built to strict quality control standards

If your vehicle is not shifting correctly or occasionally goes into limp mode, the conductor plate may be the cause. This new conductor plate makes a great replacement and has good cost savings over the dealer unit!

Part Details

  • Includes: Speed Sensor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Good
Everything went back together nicely. Pretty straight forward. So far everything seems to be working right.

Thanks.
August 27, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 11 answers
Is this piece inside the transmission?
Kris L on Jul 11, 2016
BEST ANSWER: It is. When you drop the pan from the bottom of transmission(~12 bolts) you have to remove the valve body (~another 8 bolts). This is sandwiched between the peice you just removed and the rest of the transmission. It snaps into place and all assembles back. The hardest part is accessing the transmission, mine was a jeep wk so I didn't even need to raise vehicle. Plenty of YouTube to help you through.
What is the extra 0 ring for??? Where does it go??
Stevellerva on Nov 3, 2017
BEST ANSWER: Its the o-ring seal for that connector. There is trans fluid on the other side of the connector so the o-ring keeps the fluid sealed inside the transmission pan.

Vehicle Fit

  • 2005-2014 Chrysler 300 Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)
  • 2006-2007 Chrysler Crossfire Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)
  • 2008-2014 Dodge Challenger Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)
  • 2006-2017 Dodge Charger Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)
  • 2011-2013 Dodge Durango Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)
  • 2005-2008 Dodge Magnum Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)
  • 2007-2010 Dodge Nitro Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)
  • 2008-2009 Dodge Sprinter Van Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)
  • 2009-2010 Jeep Commander (XK) Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)
  • 2006-2009 Jeep Grand Cherokee Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)
  • 2009-2012 Jeep Liberty Conductor Plate with Speed Sensor for W5A580 5 Speed Automatic Transmission (Sales Code DGJ)

This part replaces:

  • OE # 1402701261, 52108308AC, 68021352AA, 2035400253
  • Dorman 917-678
Part #: 1ATRX00088