Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This turn signal lever is a new, aftermarket replacement part. It is designed to REPLACE original units that are prone for failure. It's just what you need to get your vehicle in good working order again!


  • Includes wiper controls
  • Exact replacement
  • Design improved for more durability
  • Detailed graphics
  • Built to strict quality control standards

This combination turn signal & wiper lever makes great replacement and has substantial cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:27)
    • Use an 8mm wrench to disconnect the negative battery cable
  2. step : Removing the Dash Trim (0:40)
    • Pry out the headlight switch with a flat blade screwdriver
    • Disconnect the wiring connections from the headlight switch
    • Unsnap the dash trim
    • Move the shifter down
    • Undo the cigarette lighter wiring connector and the airbag switch connector
    • Disconnect the antenna wire from the radio
    • Disconnect the radio wiring connection
    • Pull off the dash panel
    • Remove the radio from the dash panel
  3. step : Removing the Steering Column Trim (2:53)
    • Use the Torx driver to unlock the lock cylinder locking pin
    • With the key in the on position push the lock cylinder in
    • Remove the lock cylinder
    • Remove the steering wheel tilt lever with an adjustable wrench
    • Remove the three Phillips head screws from the lower steering column trim
    • Pull off the lower steering column trim
    • Pull off the upper steering column trim
  4. step : Removing the Multifunction Switch (4:12)
    • Remove the two T20 Torx screws from the multifunction switch
    • Pull the switch free of the steering column
    • Disconnect the wiring connectors
  5. step : Installing the New Multifunction Switch (4:47)
    • Connect the wiring connectors to the new switch
    • Put the switch in place
    • Insert the two T20 Torx screws
  6. step : Reinstalling the Steering Column Trim (5:35)
    • Put the upper steering column trim panel in place
    • Put the lower steering column trim panel in place
    • Snap the steering column trim together
    • Insert the three Phillips head screws in the lower steering column trim
  7. step : Reinstalling the Dash Trim (6:21)
    • Put the dash panel into place
    • Reconnect the airbag switch connector and the cigarette lighter connector
    • Loosen the two 7mm bolts in the radio outlet
    • Push the panel on
    • Tighten the two 7mm bolts
    • Connect the wiring connector to the radio
    • Connect the antenna wire to the radio
    • Slide in the radio
    • Connect the wiring connectors to the headlight switch
    • Slide the headlight switch in
    • Insert the ignition lock cylinder with the locking pin on the bottom
  8. step : Reconnecting the Battery (8:04)
    • Reconnect the negative battery cable

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 7mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver

  • Wrenches - Metric

  • 8mm Wrench

4.91/ 5.0
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Quick fix.
This switch was a perfect fit and arrived in just a couple of days. Easy to install and it let us get a crew truck back on the job for a very small cost. In our business a parked truck costs us money. The web site photos made it easy to pick the right part, too.
February 17, 2017
Turn signal switch lever
First time ordering from 1a. They have a great selection & the shipping was very fast. The lever fit perfect and fixed my issue.
August 3, 2017
Shopping is easy
Have not received this item yet but finding it was easy and everything else Ive ordered from 1A Auto has been as described and fit perfectly, always fast shipping and has a video to show exactly how to install each part you buy , so whats not to Love . 1A Auto is the Best online parts store bar none.??????????10 star review
November 18, 2017
Thank you!
Prompt delivery. Part was installed easily. Appreciate the videos!
December 14, 2017
does what it is supposed to
This multi-function switch fits like it should and does what it is supposed to. There is absolutely no need to remove the cluster bezel on a Super Duty. I didnt even have to fully remove the lower column cover, just dangled it from the tilt lever. This job was done in less than 20 minutes outside on a cold Minnesota afternoon. All this for a quarter of what you would spend on an OE switch, and a third of buying one from a local parts house.
January 29, 2018
Exact replacement easy to install
This was the exact replacement and very easy to install. I had the clicking buzzing sound from the relay under the dash. This fixed the problem.
February 8, 2018
Combination Switch
The U-tube video was a great help and made the installation go very smoothly. Without the video I probably would have struggled through it but glad you had the guide. Pleased with the quality of the product as well.
May 18, 2018
Ford Ranger turn signal assembly
An awesome product and was very easy to install with help from your videos.. The assembly came within 3 days which was fantastic.. I thank all of you at 1 A auto..
July 2, 2018
Great job!!!
Excellent service after the sale. Received a defective part and was replaced with no problem. Have and will continue to rave and recommend your services.
July 22, 2018
Quick and easy
Quick and easy to install and the addition of providing instal videos is much appreciated.
July 24, 2018
Great part so far.
I put it on a week ago. It was a direct fit. Everything works again. My brake lights, my windshield wipers Etc. So far, I have no complaints about it
September 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this switch include high beam dimming? And how would it work with cruise control?
Rodger L October 31, 2017
It does activate/deactivate high beams. The ford trucks it fits on has cruise control on the steering wheel, not the multi-purpose lever.
Zachary S October 31, 2017
It does include high beam dimming. Dont have cruise control on my truck so I cant answer that.
Michael M October 31, 2017
It does activate hi / low beam, i dont have cruise control so dont know about that
Mark S November 1, 2017
Has nothing to do with cruise control. Works fine with high beam switching. Does not operate the rear window wiper blade
James R November 1, 2017
Year Make Model Description
2002-2007Ford F250 Super Duty Truck Ford F250 Super Duty Truck Combination Switch
2002-2007Ford F350 Super Duty Truck Ford F350 Super Duty Truck Combination Switch
2002-2003Ford F450 Truck Ford F450 Truck Combination Switch
2002-2003Ford F550 Truck Ford F550 Truck Combination Switch
2004-2011Ford Ranger Ford Ranger Combination Switch
2004-2010Mazda B2300 Truck Mazda B2300 Truck Combination Switch
2004-2008Mazda B3000 Truck Mazda B3000 Truck Combination Switch
2004-2010Mazda B4000 Truck Mazda B4000 Truck Combination Switch
Part #: 1AZTS00082

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:32 min)