Specifications:

  • Headlights not working properly
  • High Beams do not come on
  • Low Beams flicker or pulse
  • High beams will not stay on
  • Windshield Wipers work intermittently or only 1 speed
  • Turn signals do not flash
  • Switch is loose
  • Lever feels broken inside

Specifications:

  • Replaces dealer part number(s): 4607001 , 4607001 , 4760437 , 4760437AB
  • Direct replacement - Looks like, bolts in, and plugs in just as the original.
  • Design improved for more durability
  • Detailed graphics

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:54)
    • Disconnect the negative battery cable with a 10mm wrench
  2. step : Removing the Steering Column Trim (1:08)
    • Remove the T30 Torx screw from the steering wheel tilt column
    • Tilt the steering wheel up
    • Remove the six T15 screws from the bottom steering column trim panel
    • Pull the bottom trim panel down
    • Lift off the top trim panel
  3. step : Removing the Turn Signal Lever (2:53)
    • Pull the wiring out of its clip
    • Remove the two E6 screws from the turn signal lever
    • Disconnect the turn signal switch wiring harnesses
    • Pull the turn signal up and off the steering column
  4. step : Installing the New Turn Signal Lever (5:36)
    • Put the new turn signal lever into place
    • Connect the turn signal lever wiring harnesses
    • Insert the two E6 screws into the turn signal lever
    • Clip the wiring back into place
  5. step : Reinstalling the Steering Column Panels (7:01)
    • Put the top steering column panel into place
    • Hang the lower steering column panel in place
    • Start the three shorter T15 screws into the bottom steering column panel
    • Position the steering column panels
    • Start the three longer T15 screws into the bottom steering column panel
    • Tighten the six T15 screws
    • Put the tilt lever into place
    • Insert the T30 screw into the tilt lever
  6. step : Reconnecting the Battery (8:21)
    • Reconnect the negative battery cable with a 10mm wrench

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Torx Drivers & Sockets

  • T30 Torx Driver
  • T15 Torx Driver
  • E6 Inverted Torx Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1997 Chrysler Concorde Combination Switch
  • 1994-1997 Chrysler LHS Combination Switch
  • 1993-1996 Chrysler New Yorker Combination Switch
  • 1993-1997 Dodge Intrepid Combination Switch
  • 1993-1997 Eagle Vision Combination Switch

This part replaces:

  • Standard Motor Products DS-735
Part #: 1AZCC00025

How-to Video:

(08:48 min)