Chrysler PT Cruiser Heater Blower Motor with Fan Cage - 1AHCX00119

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This Chrysler PT Cruiser blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following


  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 5017666AA, 5017666AB
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Remove the AC Heater Fan Blower Motor (0:55)
    • Under the passenger side dash, unclip the cover with your flat blade screwdriver
    • Use your flat blade screwdriver to pry up the center of the clips.
    • Disconnect the motor wiring harness.
    • Unbolt the four 7 mm bolts with your socket and ratchet.
    • Pull the blower motor down and out.
  2. step : Install the new AC Heater Fan Blower Motor (3:00)
    • Attach the application-specific adapter to the wiring harness of the new blower motor
    • Insert the blower motor into place and plug in the wiring harness.
    • Bolt in the four 7 mm bolts with your socket and ratchet.
    • Secure the upholstered cover piece back into place with the push clips.
    • With the center still pulled out, insert the body of the clip and then push the center of the clip down into the body of the clip to secure it.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket

1.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Broken radiator fan
The radiator fan I purchased was poorly wired and It broke.
June 28, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2002Chrysler PT Cruiser Chrysler PT Cruiser Heater Blower Motor with Fan Cage
2003-2005Chrysler PT Cruiser Chrysler PT Cruiser with Air Conditioning Heater Blower Motor with Fan Cage
Part 1AHCX00119
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.