Chrysler PT Cruiser Front Passenger Side Power Window Regulator with Motor TRQ - 1AWRG01804

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

This replacement window regulator is just what you need to get your vehicle in good working form again!


  • RH (Passenger Side) FRONT DOOR
  • Power operation
  • Includes the Power Window Motor
  • Replaces dealer part numbers: 5017810AC, 5017814AB
  • 100% tested prior to leaving the factory
  • Direct replacement
  • Built to strict quality control standards
  • Fits Sedan Models only
    • Does NOT fit Convertible Models

This window regulator makes a great replacement and has good cost savings over the dealer part.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Remove the door panel (1:02)
    • Pull the triangular trim panel corresponding with the side mirror.
    • Remove the two 10 mm bolts in the door pull.
    • Unscrew the four Phillips screws securing the door panel.
    • Pull the door panel off.
    • Disconnect the wiring harness from the door lock switch and unclip the door latch rod.
  2. step : Remove the window regulator (2:57)
    • Unbolt the brace with your 10 mm socket and ratchet.
    • Carefully peel back the water shield.
    • Unbolt the two 10 mm bolts with your socket and ratchet to remove the window up and out of the regulator.
    • Secure your window with painters tape so it is up and out of the way.
    • Disconnect the electrical for the power window.
    • Unbolt the seven 10 mm nuts securing the power window regulator assembly.
    • Carefully finesse the assembly out of the door.
  3. step : Install your new window regulator (5:48)
    • Feed the assembly into place within the door.
    • Secure with the seven 10 mm nuts and connect the electrical lead to the window motor.
    • Carefully lower the window down into the clamps in the regulator and secure with your 10 mm socket and ratchet.
    • Replace the water shield and bolt the brace back onto the door with your 10 mm socket and ratchet.
  4. step : install your door panel (8:11)
    • Connect the power door lock switch and door latch rod.
    • Pin the door panel on.
    • Secure the door panel with the four Phillips screws and two 10 mm bolts.
    • Snap the triangular side mirror trim panel back onto the door.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Works great
Great product, great video on how to install. One point that I did not see in the video: leave the clamps that grip the window slightly loose, raise the window, then secure. This will the window to seat properly when closed. As for the install: Some of the hardware had to be transferred from the old unit, but this is expected for after market parts (and some new). I was a little concerned about how well the studs gripped. I was cautious as to not over tighten, but they spun slightly while tightening the nut after mounting to the door. I operated the window numerous times to see if the torque of the motor movement would strip out the holes and they appear to be more than secure.
March 7, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Wwill this part fit a 2006 pt cruiser passenger front window?
Colleen G June 9, 2017
This is specific to 2001 - 2004 PT Cruiser, and 2005 PT Cruiser Sedan. At this time we do not have the appropriate replacement for your 2006 model.
Alex P June 9, 2017
Year Make Model Description
2001-2004Chrysler PT Cruiser Chrysler PT Cruiser Front Passenger Side Power Window Regulator with Motor
2005Chrysler PT Cruiser Chrysler PT Cruiser Sedan Front Passenger Side Power Window Regulator with Motor
Part 1AWRG01804
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: WRA52316