Replaces

Chrysler PT Cruiser Brake Rotor Front Pair Nakamoto 53000-DSZ - 1APBR00193

Part Details

  • Front Brake Rotor Specifications:
    Vented
    5 Lug
    11.02" (280mm)
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Brake Rotor Coating: Zinc Coated
  • Front or Rear Location: Front
  • Product Line: Performance

Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • Size: 11" x 0.9" Inches (280mm x 23mm)
  • Does NOT fit models with Sport Suspension
    • Sport Suspension uses 11" x 1.1" Inches (280mm x 28mm) Rotors
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:30)
    • Loosen the lug nuts
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside
  2. step : Remove the calipers and rotor (2:10)
    • Unbolt the 12 mm bolts to remove the calipers.
    • Remove the brake pads.
    • Use a breaker bar to unbolt the 18 mm caliper bracket bolts.
    • Remove the rotor.
    • A few smacks with a hammer may be needed to get the rotor off.
  3. step : Install the calipers and new rotors. (4:30)
    • Clean the hub with a wire brush and apply anti seize grease.
    • Install a new rotor after cleaning it with brake parts cleaner.
    • Clean the caliper bracket with a wire brush.
    • Check the caliper bracket pistons and put new brake pads into the brackets.
    • Put the caliper on and torque the bolts to 20 foot pounds
    • Torque the caliper bolts to 85 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 12mm Wrench
  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2002Chrysler PT Cruiser Chrysler PT Cruiser Front Brake Rotor Pair Cross Drilled & Slotted Zinc Coated Performance Nakamoto
2003-2010Chrysler PT Cruiser Chrysler PT Cruiser Front Brake Rotor Pair (excluding Turbo Models) Cross Drilled & Slotted Zinc Coated Performance Nakamoto

This part replaces:

  • Nakamoto 53000-DSZ
Part #: 1APBR00193

Out of Stock

Nakamoto
Brand #: 53000-DSZ

How-to Video:

(10:25 min)