Replaces

Chrysler Aspen Dodge Durango Exterior Door Handle Pair Rear - 1ADHS00741

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Black
  • Quantity:   Pair
  • Front or Rear Location:   Rear
  • Finish:   Smooth - Paint to Match

These replacement exterior door handles are just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR DOOR
  • Smooth Black Finish
    • can be painted by buyer to match or installed as is
  • Replaces dealer part numbers: 1EH601XRAA, 1EH611XRAA
  • Durable construction
  • Direct replacements
  • Built to strict quality control standards

These exterior door handles are great replacements and have good cost savings over the dealer units.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:37)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the Phillips head screw inside the door handle
    • Remove the two Phillips screws at the bottom of the door panel
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Remove the clip from the door lock rod
    • Remove the door lock rod
    • Disconnect the window wiring harness
  2. step : Removing the Door Handle (1:46)
    • Carefully peel back the water shield
    • Unclip the lock rod from the door handle
    • Remove the two 8mm nuts from the door handle
    • Pull the door handle off from the outside
  3. step : Installing the Door Handle (3:14)
    • Unclip the lock rod from the old handle
    • Clip the lock rod onto the new handle
    • Put the handle into place
    • Fasten the two 8mm nuts onto the door handle
    • Clip the lock rod into place
    • Put the water shield into place
  4. step : Reinstalling the Door Panel (5:01)
    • Connect the window wiring harness
    • Connect the door lock rod to the door handle
    • Reclip the clip to the door lock rod
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the two Phillips screws at the bottom of the door panel
    • Insert the Phillips head screw inside the door handle
    • Push on the trim piece inside the door handle

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2009Chrysler Aspen Chrysler Aspen Rear Exterior Door Handle Smooth - Paint to Match Black Pair
2004-2009Dodge Durango Dodge Durango Rear Exterior Door Handle Smooth - Paint to Match Black Pair
Part #: 1ADHS00741

Ships in 1-3 Business Days. Delivery times vary.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:04 min)