Replaces

Chrysler 300 Dodge Caliber Fog / Driving Light Pair - 1ALFP00193

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications:

  • Comes as a Pair
    • Fits both the LH (Driver Side) & RH (Passenger Side)
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacements
  • Does not include bulbs or wiring
  • Circular Style

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Fit guaranteed

  • These fog lamps will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • If these fog lights should fail to provide satisfactory performance you may exchange them.
  • 1A Auto fog lights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged fog lamp with a fog light from 1A Auto can help increase your resale value.
Safety
  • A new driving light can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched driving light.
    • 1A Auto fog lights can help you see farther at night and in poor driving conditions.
    • A set of new fog lights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Air Dam (0:53)
    • Raise and support the vehicle on jack stands
    • Remove the three plastic pins on both sides of the dam
    • Remove the bolts along the bottom of the bumper
    • Remove the air dam
  2. step : Removing the Fog Light (1:37)
    • Disconnect the bulb connector
    • Compress the three tabs and push the fog light out of the bumper
  3. step : Installing the Fog Light (2:07)
    • Insert the fog light into place
    • Click and lock in the tabs
    • Connect the bulb
  4. step : Installing the Air Dam (2:30)
    • Insert the air dam into place
    • Tighten the bolts along the bottom of the bumper
    • Press the six pins into the dam

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2006Chrysler 300 Chrysler 300 Fog / Driving Light Pair
2007-2008Chrysler 300 Chrysler 300 Fog / Driving Light Pair for Models without Headlight Washers
2008-2009Dodge Caliber Dodge Caliber Fog / Driving Light Pair for Models with Unpainted Bumper Cover
Part #: 1ALFP00193


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:44 min)