Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
This video we're going to show you how to replace the taillight connector plate in this 2004 Chevy Trailblazer. Pretty easy job, you just need a Phillips screwdriver and this is usually a problem if your lights are malfunctioning, but the bulbs all seem to be fine.
Start by removing two Phillips screws. Once you have those screws out you just want to kind of pull on your lamp and it comes out pretty easy. There are two tabs here that go here and disconnect your harness there's a little tab right here. Now this board can get shorted out, we just want to replace it. We just want to remove three screws. You can see that the bulbs are in this, you just want to remove the bulbs, put them in for the new one and. Screw back in. Now take your white two tabs, you can line them up here. First, see the connector plate plugs right in and then just kind of look from the side here, see those tabs go in. Should be all set.
We hope this helps you out. Brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
