Replaces

Chevy Tail Light with Circuit Board Driver Side - 1ALTL00277

This replacement Chevy Trailblazer tail light is just what you need to get your SUV in good looking form again!

Specifications

  • LH (Driver side)
  • Direct bolt on
  • Replaces dealer part numbers: 15131578, 16532713
  • Includes circuit board as shown
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Chevy Trailblazer tail light makes a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the tail light assembly (0:21)
    • Open the tail gate and remove the two Phillips screws.
    • Pull the tail light assembly out.
    • Disconnect the wiring harness from under the vehicle and remove the bulbs.
    • Service your bulbs at this point or put your bulbs in the new tail light assembly.
  2. step : Install the tail light assembly (1:40)
    • Plug in the bulbs and wiring harness.
    • Clip the tail light assembly into the vehicle.
    • Screw in the two Phillips screws
    • Close the tail gate.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
tail light perfect
It was perfect, easy to install, I am so happy for knowing about your web site, thank you so much
January 24, 2017
Purchased
1 year ago
Perfect fit and arrived fast
Except for the fact that it's new and pretty it's identical to the original and cost half of what the local parts store was asking (and they said 3 to 5 days: this one got here in two days - not bad for coming to small town in Montana) PS these guys also have me won over with their great How-to's and the fact that i can talk to a real person
March 14, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Does this come with the bulbs?
Tony M on Feb 13, 2018
BEST ANSWER: Our lights do not include the bulbs. You may be able to reuse your original bulbs.

Vehicle Fit

  • 2002-2009 Chevy Trailblazer Tail Light with Circuit Board Driver Side
  • 2002-2006 Chevy Trailblazer EXT Tail Light with Circuit Board Driver Side

This part replaces:

  • Partslink GM2800150
  • Hollander 166-1960
  • OE # 15097513
  • TYC 11-5830-01
  • DEPO 335-1904L-AF
Part #: 1ALTL00277



How-to Video:

(03:15 min)