This replacement Tail light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits RH (Passenger Side)
    • Mounts on 1/4 (quarter) panel
  • Replaces dealer part number: 15273472
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Fits 2007 models with the classic body style
  • Fits models with Fleetside Bed only
    • Does NOT fit models with Stepside Bed
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the tail light assembly (0:50)
    • Remove the two screws securing the tail light.
    • Use a hammer to work the screws out with your Phillips screwdriver if they are rusted in there.
    • Take care not to strip the bolt.
    • Remove the tail light assembly.
    • Unplug the bulbs and wiring harness.
    • At this point you can service the bulbs or replace the tail light assembly completely.
    • If the screws are turning but not coming out, it means the clips have rusted out, so you can pull on the tail light while you unscrew it to get it loose.
  2. step : Install the new tail light/serviced tail light assembly. (4:20)
    • Plug in the bulbs and wiring harness into the tail light assembly.
    • Put the tail light assembly back into place.
    • Secure with the two screws and Phillips screwdriver.

Tools needed for replacement:

    General Tools

  • Hammer

  • Screwdrivers & Related

  • Phillips Head Screwdriver

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
replace tail light
replacement went well, lights all worked, getting old mounting screws out was the hardest because of dirt and rust.Slow and steady on the screws with lots of wd-40 got the job done.
July 15, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2006 Chevy Silverado 1500 Tail Light for Models with Fleetside Bed Passenger Side
  • 2007 Chevy Silverado 1500 Classic with Fleetside Bed Tail Light Passenger Side
  • 2005-2006 Chevy Silverado 1500 HD Tail Light Passenger Side
  • 2004 Chevy Silverado 2500 Tail Light for Models with Fleetside Bed Passenger Side
  • 2004-2006 Chevy Silverado 2500 HD Tail Light for Models with Fleetside Bed Passenger Side
  • 2007 Chevy Silverado 2500 HD Classic with Fleetside Bed Tail Light Passenger Side
  • 2004-2006 Chevy Silverado 3500 Tail Light for Models with Fleetside Bed Passenger Side
  • 2007 Chevy Silverado 3500 Classic with Fleetside Bed Tail Light Passenger Side

This part replaces:

  • Partslink GM2801174
  • Hollander 166-02138R
  • OE # 15273472
  • TYC 11-5851-90
  • DEPO 335-1906R-AF-DR
Part #: 1ALTL00485

How-to Video:

(05:51 min)