This replacement Chevy Avalanche tail light pair is just what you need to get your Chevy Avalanche in good looking form again!

Tail Light Specifications

  • Comes as a Pair
  • Replaces dealer part numbers: 15771437, 15092493
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Includes tail light lens and housing

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Chevy Avalanche tail light pair makes a great replacement and has good cost savings over a dealer unit.

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Tail Lights (0:25)
    • Lower the tail gate
    • Loosen the two Phillips screws
  2. step : Servicing the Bulbs (0:41)
    • Press the tab on the socket
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step : Installing the Tail Lights (1:43)
    • Lower the harness beneath the bed that connects to the tail light
    • Remove the red safety tab
    • Disconnect the wiring harness
    • Remove the wiring harness and old sockets
    • Lower the new harness into place
    • Connect the tail light
    • Tighten the Phillips screws to the tail light

Tools needed for replacement:

    General Tools

  • Pick

  • Materials, Fluids, and Supplies

  • Paper Towels

  • Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002 Chevy Avalanche 1500 Tail Light Pair for Models with Passenger Side Original Black Connector
  • 2003-2006 Chevy Avalanche 1500 Tail Light Pair
  • 2002 Chevy Avalanche 2500 Tail Light Pair for Models with Passenger Side Original Black Connector
  • 2003-2006 Chevy Avalanche 2500 Tail Light Pair

This part replaces:

  • OE # 15771437
  • OE # 15092493
  • Partslink GM2801153, GM2818103
Part #: 1ALTP00380



How-to Video:

(04:26 min)