Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Side Location:   Driver Side

Specifications:

  • Fits LH (Driver Side)
    • Mounts above headlight
  • Replaces dealer part number: 15077336
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Does not include bulbs or wiring

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Pins (1:01)
    • Open your hood, and locate the pins that hold the headlight in. Twist these pins, and remove to release the headlight from the mounting bracket.
  2. step : Disconnecting the Headlight (1:10)
    • Pull the headlight forward, and locate the low beam and high beam connectors. Disconnect them by putting your thumb into securing clasp and pulling.
    • The headlight is now free from the vehicle.
  3. step : Connecting the New Headlight: (1:32)
    • Bring your new headlight over and reconnect the low beam connector. Do the same for the high beam connectors.
  4. step : Replacing the new Headlight (1:50)
    • Slide the headlight back into the vehicle, making sure the low beam connector is pushed back into the hole so it doesn't get caught between the headlight and the mounting bracket.
    • Press everything down and lock them back into place with the pins.
  5. step : Test the New Headlight (2:23)
    • Make sure to test both low and high beams.

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002Chevy Avalanche 1500 Chevy Avalanche 1500 Parking Light Driver Side
2003-2006Chevy Avalanche 1500 Chevy Avalanche 1500 Parking Light for Models with Lower Body Cladding Driver Side
2002-2006Chevy Avalanche 2500 Chevy Avalanche 2500 Parking Light Driver Side
Part #: 1ALPK00483


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:33 min)