Replaces

Chevy Malibu Pontiac G6 Brake Kit Nakamoto MD1160, 25797351 - 1ABFS02595

Brake Pad Specifications:

  • Premium Posi Semi Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Pair
    • Includes LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacement
  • Fits 5 Lug Wheel
  • 10.87" (276mm) diameter vented

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:42)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:04)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:24)
    • Remove 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad brackets
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (2:07)
    • Remove the 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (2:30)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on
    • Remove the brake pad slides
    • Put the bracket back into place
    • Start the 15mm bolts by hand
    • Tighten the bolts to 65 foot-pounds of torque
  6. step : Installing the New Brake Pads (3:54)
    • Clean the brake pad brackets with a wire brush
    • Push the brackets onto the caliper bracket
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts the 14mm by hand
    • Tighten bolts to 35 foot-pounds
  7. step : Reattaching the Wheel (5:22)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  8. step : Testing the Brakes (5:58)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • White Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007 Chevy Malibu Front Premium Posi Semi-Metallic Brake Kit for Models with 10.87 (276mm) Diameter Front Rotors RPO Code J67 (4 Wheel Disc, 4 Wheel ABS Brakes) Nakamoto
  • 2008 Chevy Malibu Front Premium Posi Semi-Metallic Brake Kit for Models with RPO Code J67 (4 Wheel Disc, 4 Wheel ABS Brakes) Nakamoto
  • 2007 Pontiac G6 Front Premium Posi Semi-Metallic Brake Kit for Models with RPO Code J67 (4 Wheel Disc, 4 Wheel ABS Brakes) Nakamoto
  • 2007 Pontiac G6 Front Premium Posi Semi-Metallic Brake Kit for Models with RPO Code J66 (4 Wheel Disc Brakes) without ABS Brakes Nakamoto

This part replaces:

  • Reference Number MD1160
  • Reference Number 55095
  • Hollander 530-00116
  • OE # 25797351, 22705302
  • Nakamoto MD1160, 25797351
Part #: 1ABFS02595


Nakamoto
Brand #: MD1160, 25797351

How-to Video:

(06:18 min)