This replacement mirror is just what you need to get your vehicle in good working condition again!

Specifications:

  • Fits LH (Driver Side)
  • Power Mirror
  • Folding - Manual operation
  • Replaces dealer part number: 15921264
  • Injection molded black plastic housing
    • Can be painted by the buyer to any color desired or installed as is
  • Direct replacement
  • Built to strict quality control standards
  • Not Heated

This mirror makes a great replacement and has good cost savings over a dealer part.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:54)
    • Pry out the panel behind the pull handle.
    • Remove the two T25 Torx screws.
    • Pry out the door handle bezel.
    • Disconnect the lock switch.
    • Pry up the switch panel from the front.
    • Disconnect the harnesses.
    • Push the center in on the fasteners on the outside of the door panel, and pry them free,
    • Pry out along the edge of the panel to release the clips.
    • Pry off the triangular speaker panel.
    • Lift the door panel up and off.
    • Disconnect the trunk lock.
  2. step : Removing the Side Mirror (4:48)
    • Disconnect the mirror harness.
    • Remove the three 10mm nuts that secure the mirror.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (5:20)
    • Feed the harness through the door.
    • Line up the mirror and push it into place.
    • Replace the three 10mm nuts.
    • Connect the mirror harness.
  4. step : Replacing the Door Panel (7:05)
    • Reconnect the trunk lock.
    • Lift the door panel up and over the lock knob and into place. Bring the harnesses up through the door panel.
    • Push the clips around the edges of the door panel back into place
    • Replace the pins on the outside of the door panel.
    • Replace the two T25 Torx screws.
    • Replace the triangular speaker panel.
    • Replace the panel under the door pull.
    • Reconnect the lock switch and push the door handle bezel back into place.
    • Reconnect the switch panel and push it into place back first.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T25 Torx Driver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
perfect fit
I did not know the original was a heated unit as I ordered the mirror without scoping out the old one. But as I did not care about the heat I was glad to see the connector from the non heated unit fit the harness perfectly.
Good unit and operates as one would hope.
February 8, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Does the power mirror come with heat?
Steve S on Oct 22, 2015
BEST ANSWER: This is a power non-heated mirror. You will want to match your existing mirror options to make it a plug and play replacement. Thank you and have a great day!

Vehicle Fit

  • 2004-2007 Chevy Malibu Power Manual-Folding Mirror Driver Side
  • 2008 Chevy Malibu Classic Power Manual-Folding Mirror Driver Side

This part replaces:

  • Partslink GM1320287
  • Hollander 128-03128L
  • OE # 15921264
  • TYC 1370032
  • DEPO 335-5407L3EF
Part #: 1AMRE01364



How-to Video:

(09:59 min)