Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This is a high quality replacement gas tank made to the same specifications as the original.

Specifications:

  • Capacity: 16.6 Gallons
  • Dimensions: 30 3/4 x 30 1/4 x 10 1/8 inches
  • Without pan in tank

 

48 States Only:

Due to shipping restrictions, we can only ship this to a physical address within the Contiguous U.S. (lower 48 states).

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Scratches and Dings

Due to the nature and size, a fuel tank may incur minor dents or scratches from handling and load shifting during shipping. These damages do not affect the fit or function of the part. Neither our 60 Day satisfaction guarantee, nor the manufacturer's warranty, cover these insignificant damages.

    Continuing the Repair This is Part 3 of a three-part video Please consult Parts 1 and 2 for prior instructions Perform the steps outlined in Parts 1 and 2

  1. step : Removing the Old Gas Tank Straps (0:38)
    • Spray penetrating oil on the gas tank strap bolt
    • Remove the bolt with a 15mm wrench
    • Put the bolt in a vise and remove the clip
    • Put the new straps halfway in place
    • Loosely tighten the 15mm bolts two or three turns
  2. step : Installing the New Gas Tank (2:39)
    • Insert the gas tank in place
    • Start to jack up the fuel tank correcting the position
    • Connect the wiring harness on the gas tank
    • Jack up the fuel tank
  3. step : Reconnecting the Fuel Lines (4:07)
    • Insert the first 15mm bolt into the gas strap
    • Tighten the fuel filler hose and the fuel vapor hose clamps
    • Connect the fuel filter line and push its bracket in place
    • Connect the two fuel lines
    • Insert a few gallons of fuel into the tank
  4. step : Testing the Fuel Pump (5:43)
    • Connect the fuel pump relay
    • Turn on the vehicle to see if the fuel pump comes on
    • Start the engine
    • Turn the vehicle off
    • Check underneath the car for any leaks
  5. step : Reinstalling the Gas Tanks Straps and Exhaust (6:15)
    • Pry down on the exhaust a little with a pry bar
    • Tighten the second 15mm bolt to the remaining gas tank strap
    • Finish tightening the gas tank straps
    • Insert the heat shield and replace the 7mm bolts
    • Insert the exhaust pipe into place
    • Replace the exhaust pipe hangers

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Wrenches - Metric

  • 15mm Wrench
  • 18mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-1999Chevy Lumina Chevy Lumina Sedan Fuel Tank
1997-1998Chevy Monte Carlo Chevy Monte Carlo Fuel Tank
1999Chevy Monte Carlo Chevy Monte Carlo Fuel Tank V6 3.8L
1999Chevy Monte Carlo Chevy Monte Carlo V6 3.1L Fuel Tank for Models without Onboard Vapor Recovery System
Part #: 1AFGT00306


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:24 min)