Chevy Interior Door Handle Bezel ACDelco 15214506 - ACDMX00003

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

step : Removing the Door Panel (0:57)

• Use a small flat blade screwdriver to pry off the bolt cover
• Use the screwdriver to pop the tabs that hold the door handle bezel
• Pry off the door handle bezel
• Use the screwdriver to pry off the power window switch bezel
• Pull out the power window switch
• Disconnect the power window switch wire
• Use the 7mm socket to remove the two door panel bolts
• Pry off the door panel by hand

step : Removing the Door Handle (2:46)

• Remove the 10mm bolt from the door handle
• Pull the handle forward and off
• Unclip the latch rods from the door handle

step : Installing the Door Handle (3:23)

• Clip the latch rods onto the door handle
• Slide the door handle into place
• Insert the 10mm bolt into the door handle

step : Reattaching the Door Panel (5:02)

• Thread the power window switch wire through its cavity
• Push the door panel into place
• Push the door panel pins in
• Reconnect the power window switch wire
• Pop the power window switch into place
• Line up the door handle bezel guide pin
• Push in the door handle bezel
• Push all the corners of the bezel in
• Insert the 7mm bolts
• Tighten the 7mm bolts
• Replace the bolt cover
• Make sure the door is unlocked before closing it