Specifications:

  • LH (Driver Side)
    • Quarter (1/4) panel mounted
  • Replaces dealer part number: 10335607
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Does not include bulbs or wiring
  • For 2004 models, this Tail light will fit up thru VIN 49209453. Your VIN number can be found on your vehicle registration or under the windshield near the driver's side "A" pillar post

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:54)
    • Pry out the pins along the trunk insulation.
    • Pull the insulation back.
    • Remove the three thumb screws from the back of the taillight.
    • Pull the taillight assembly straight out.
    • Press the tab on the connector and disconnect the taillight assembly.
  2. step : Replacing a Bulb (2:02)
    • Twist the socket counterclockwise.
    • Pull the bulb straight out.
    • Push the new bulb into place.
    • Twist the socket clockwise to lock it back into place.
  3. step : Replacing the Taillight Assembly (2:29)
    • Twist out all of the sockets from the old taillight and twist them into the new taillight.
    • Reconnect the harness.
    • Line up the taillight and push it into place.
    • Replace the three thumb screws.
    • Replace the insulation.
    • Reinsert the pins into the insulation.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Taillight for a 01 impala
shipping was fast and the taillight fit like a glove, very pleased overall.
I would recommend to a friend !!
August 7, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2000-2003Chevy Impala Chevy Impala Outer Tail Light Driver Side
2004Chevy Impala Chevy Impala Outer Tail Light (Built Before VIN 49209454) Driver Side

This part replaces:

  • Partslink GM2800142
  • Hollander 166-01814L
  • OE # 10335607
  • TYC 11-5898-01-1
  • DEPO 335-1903L-AS
Part #: 1ALTL00425


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:55 min)