This replacement mirror is just what you need to get your vehicle in good working condition again!

Specifications:

  • Fits RH (Passenger Side)
  • Power
  • Heated
  • Smooth mounting base
  • Injection molded Smooth Black plastic housing
    • Can be painted to match by buyer, or installed as is
  • Direct replacement
  • Built to strict quality control standards

This mirror makes a great replacement and has good cost savings over a dealer unit.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:46)
    • Pull back the door handle and pry out the small panel behind it.
    • Pry out the panel in the door pull cup.
    • Pry off the reflector.
    • Remove the 8mm bolt behind the reflector.
    • Remove the three uncovered T30 bolts.
    • Pry out the triangular panel at the top of the door panel.
    • Pry out the clips around the door panel.
    • Lift the door panel up and off.
    • Pinch the tabs and release the door handle cable.
    • Disconnect the harness.
  2. step : Removing the Side Mirror (2:26)
    • Cut the tape that holds the mirror harness to the clip in the door.
    • Disconnect the mirror harness.
    • Remove the three 10mm nuts that secure the mirror.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (3:05)
    • Feed the harness down through the door.
    • Line up the mirror and push it into place.
    • Replace the three 10mm nuts.
    • Reattach the harness to the clip in the door.
    • Reconnect the harness.
  4. step : Replacing the Door Panel (4:34)
    • Reconnect the door handle cable.
    • Reconnect the harness.
    • Line up the door panel down over the lock knob.
    • Hit the clips in around the edge of the door panel.
    • Replace the three T30 bolts.
    • Replace the 8mm bolt.
    • Replace the triangular trim panel.
    • Replace the small trim panels behind the door handle and pull cup.
    • Replace the reflector.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2013 Chevy Impala Power Heated Smooth Base Mirror Passenger Side
  • 2014-2016 Chevy Impala Limited Power Heated Smooth Base Mirror Passenger Side

This part replaces:

  • Partslink GM1321330
  • Hollander 128-02009R
  • OE # 20759198
Part #: 1AMRE02086



How-to Video:

(06:07 min)