This replacement mirror pair is just what you need to get your vehicle in good working order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Power operation
  • Smooth mounting base
  • Injected molded plastic housing
  • Direct replacement
  • Built to strict quality control standards
  • Unheated

This mirror set makes a great replacement and has good cost savings over a dealer mirror.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:46)
    • Pull back the door handle and pry out the small panel behind it.
    • Pry out the panel in the door pull cup.
    • Pry off the reflector.
    • Remove the 8mm bolt behind the reflector.
    • Remove the three uncovered T30 bolts.
    • Pry out the triangular panel at the top of the door panel.
    • Pry out the clips around the door panel.
    • Lift the door panel up and off.
    • Pinch the tabs and release the door handle cable.
    • Disconnect the harness.
  2. step : Removing the Side Mirror (2:26)
    • Cut the tape that holds the mirror harness to the clip in the door.
    • Disconnect the mirror harness.
    • Remove the three 10mm nuts that secure the mirror.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (3:05)
    • Feed the harness down through the door.
    • Line up the mirror and push it into place.
    • Replace the three 10mm nuts.
    • Reattach the harness to the clip in the door.
    • Reconnect the harness.
  4. step : Replacing the Door Panel (4:34)
    • Reconnect the door handle cable.
    • Reconnect the harness.
    • Line up the door panel down over the lock knob.
    • Hit the clips in around the edge of the door panel.
    • Replace the three T30 bolts.
    • Replace the 8mm bolt.
    • Replace the triangular trim panel.
    • Replace the small trim panels behind the door handle and pull cup.
    • Replace the reflector.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Satisfied Customer
Got both mirrors and installed them easily. However, the video says the bolt behind the door reflector is 8mm, it is actually 7mm so you will want to get the right tool for this bolt. Both mirrors look great and I am very happy with the purchase.
February 6, 2018
Purchased
4 months ago
very happy
I loved the replacement mirror's that I purchased they went on perfect and I got them in before I expected to get them fast shipping. I am very pleased. thank you.
February 1, 2018
Purchased
5 months ago
Perfect Fit
I only actually needed one side mirror but since my car was a different color, I decided to go with the set since it was only about $20 more. Was not disappointed and it looks great. I would recommend getting.
August 21, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2013 Chevy Impala Power Smooth Base Mirror Pair
  • 2014-2016 Chevy Impala Limited Power Smooth Base Mirror Pair

This part replaces:

  • OE # 15789251
  • OE # 15789250
Part #: 1AMRP00256

How-to Video:

(06:07 min)