Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • Brand New Headlights
  • Fits LH (Driver Side)
  • Bulbs not included
  • Direct replacements
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing The Headlight (0:50)
    • Remove the pin from the small flap over the light (remove the center of the pin first).
    • Remove the clip under the flap.
    • Remove the clip on the opposite end of the light.
    • Pull the light free.
    • Disconnect the wiring harness.
  2. step : Replacing a Bulb (3:22)
    • Remove the rubber boot from the backside of the light you want to replace.
    • Push in the thumb tab (turn signal bulb) and twist the bulb free.
    • Pull the bulb from the socket and replace it.
    • Twist bulb back into place and replace the rubber boot.
  3. step : Reinstalling the Headlight (5:00)
    • Plug in the wiring harness.
    • Fit the light into place.
    • Slide the clips back into place making sure they are locked on properly.
    • Put the flap back down and reinsert the pin.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
I was satisfied ant the original replacement. However I learned that the high beam was way off. I contacted the company and informed them of the problem. I was informed that a new replacement would be sent to replace the defective headlight assembly at no charge. I will not hesitate to use a1Auto again. I used them before for parts for my wifes Galant and was extremely satisfied with the attention I was give. Thank you
August 19, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2003Chevy Impala Chevy Impala Headlight Driver Side
2004Chevy Impala Chevy Impala (Built Before 2/06/04 Production Date) Headlight Driver Side
Part #: 1ALHL00301


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:46 min)