This replacement grille is just what you need to get your vehicle in good looking form again!

Specifications:

  • Brand New Lower Grille
  • Black mesh with chrome trim
  • High quality injection molded plastic
  • Replaces dealer part number: 15835084
  • Direct fit replacement
  • Built to strict quality control standards

This grille makes a great replacement and offers good value over the dealer unit.

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Fender Liner (0:24)
    • Remove the 7mm bolts from the fender liner
    • Pry out the barbed clips in the liner with a flat blade screwdriver
    • Peel back the fender liner to access the bulbs
  2. step : Removing the Fog Light Wiring Harness (1:03)
    • Disconnect the wiring harness from the fog lamp
  3. step : Removing the Bumper Cover (1:22)
    • Remove the two 10mm bolts from behind the bumper
    • Remove the six 10mm bolts from the top of the bumper cover
    • Tug the side of the cover to unhook it on both sides
    • Lift the cover and grille up and off
  4. step : Removing the Upper Grille (3:06)
    • Remove the 10mm nuts from the emblem
    • Pry out the metal spring clips on both sides of the grille with a flat blade screwdriver
    • Compress the plastic spring tabs with a flat blade screwdriver
    • Press the tabs on the side of the grille out of the bumper cover
    • Remove the upper grille
  5. step : Removing the Lower Grille (5:04)
    • Press the plastic push tabs on the lower grille
    • Press the grille out of the bumper cover
  6. step : Installing the Lower Grille (6:28)
    • Snap the grille into the bumper cover until it clicks and the tabs spring out
  7. step : Installing the Upper Grille (7:58)
    • Place the bumper cover face up
    • Snap the grille into the bumper cover until it clicks and the tabs spring out
    • Snap in the metal spring clips on both sides
    • Slide the emblem into the slot
    • Tighten the 10mm nuts to the emblem
  8. step : Installing the Bumper Cover (10:28)
    • Lift the bumper cover assembly into place
    • Clip in the sides
    • Tighten the six 10mm bolt to the top of the cover
    • Tighten the two 10mm bolts behind the bumper
  9. step : Connecting the Fog Light Wiring Harness (11:41)
    • Connect the fog light wiring harness
  10. step : Reinstalling the Fender Liner (11:50)
    • Press in the clips to the fender liner
    • Tighten the 7mm bolts to the liner

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007 Chevy Avalanche 1500 (without Off Road Package) Chrome & Black Lower Grille
  • 2008-2012 Chevy Avalanche 1500 Chrome & Black Lower Grille
  • 2007 Chevy Suburban 1500 (without Off Road Package) Chrome & Black Lower Grille
  • 2008-2012 Chevy Suburban 1500 Chrome & Black Lower Grille
  • 2007 Chevy Suburban 2500 (without Off Road Package) Chrome & Black Lower Grille
  • 2008-2012 Chevy Suburban 2500 Chrome & Black Lower Grille
  • 2007 Chevy Tahoe (without Off Road Package) Chrome & Black Lower Grille
  • 2008-2012 Chevy Tahoe Chrome & Black Lower Grille (excluding Hybrid Models)

This part replaces:

  • Partslink GM1200553
  • Hollander 104-01737
  • OE # 15835084
Part #: 1ABGR00470

How-to Video:

(12:14 min)