This replacement grille is just what you need to get your vehicle in good looking form again!

Specifications:

  • Chrome plated injected molded plastic with argent (gray) painted inserts
  • High quality item that is built to strict quality control standards
  • Direct bolt on
  • Has proper area for the Chevy emblem (not included), but is raised unlike original grille in which area is flush
  • Fits vehicles with composite headlights only (not sealed beam lights)

Makes a great replacement and has good cost savings over a dealer grill.

NOTE: The emblem provision on this grille is slightly different from the original. This is to not infringe on Chevy's patten.

48 States Only:

Due to shipping restrictions, we can only ship this to a physical address within the Contiguous U.S. (lower 48 states).

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Parking Lights (0:35)
    • Remove the four Phillips head screws from the parking light
    • Pull the light out
    • Twist the bulb sockets counterclockwise and out
    • Twist the bulb socket out of the side marker light
    • Repeat these steps for the other parking light
  2. step : Removing the Grille (1:16)
    • Remove the four 7mm bolts from the top of the grille
    • Remove the 7mm bolt from the center of the grille
    • Undo the three tabs at the bottom of the grille, using a flat blade screwdriver if necessary
  3. step : Preparing the New Grille (2:19)
    • Remove the ten 13mm nuts from the marker lights and reflectors, and the badge on the old grille
    • Push the plastic clips out of the old grille, using a flat blade screwdriver if necessary
    • Put the marker lights and reflectors onto the new grille
    • Fasten the 13mm nuts onto the marker lights and reflectors
    • Push the badge onto the new grille
    • Fasten the 13mm nuts onto the badge
    • Push the eight plastic clips into the new grille
  4. step : Installing the New Grille (4:01)
    • Pull the bulb sockets through the grille as you position it
    • Push in the center grille tab
    • Push in the two outside grille tabs
    • Insert the four 7mm bolts into the top of the grille
    • Insert the 7mm bolts into the center of the grille
  5. step : Reinstalling the Parking Lights (4:48)
    • Twist the bulb socket into the marker light
    • Twist the bulb sockets into the parking light
    • Push the parking light into place
    • Insert the four Phillips screws into the parking light
    • Repeat these steps for the other marker light and parking light

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Bit in a Ratchet

  • Sockets - Metric

  • 13mm Socket
  • 7mm Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Chevy grill
Excellent service at great prices. The instructional reviews are also excellent and have all the necessary instructions
February 27, 2017
Purchased
1 year ago
Great Grille
The grille fit like a glove and was easy to install. The website video helped a lot.
January 22, 2017
Purchased
1 year ago
99 burb k2500
The grille looks good. Fit was pretty good, looks just a tiny bit off on the fender seam, but im probly the only one that can see it. The side marker lights also were a tight fit, to where i had to elongate the mounting hole a smidge to get them to center up. Overall, its good and would buy again if needed in the future.
January 29, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
It says that the chevy bowtie emblem is different to not infringe on chevy's pattern, does that mean that the bowtie will not fit? Or how does that work?
George on Jun 2, 2017
BEST ANSWER: The emblem will install, but will not sit flush. Our grille will make it so the emblem is more outwards.

How-to Video:

(05:47 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Bit in a Ratchet

  • Sockets - Metric

  • 13mm Socket
  • 7mm Socket



This part replaces:

  • Partslink GM1200238
  • OE # 15981106

Vehicle Fit

  • 1994 Chevy Blazer Full Size Chrome & Argent Grille for Models with Composite Headlights
  • 1994-1998 Chevy C1500 Truck Chrome & Argent Grille for Models with Composite Headlights
  • 1994-2000 Chevy C2500 Truck Chrome & Argent Grille for Models with Composite Headlights
  • 1994-2002 Chevy C3500 Truck Chrome & Argent Grille for Models with Composite Headlights
  • 1994-1998 Chevy K1500 Truck Chrome & Argent Grille for Models with Composite Headlights
  • 1994-2000 Chevy K2500 Truck Chrome & Argent Grille for Models with Composite Headlights
  • 1994-2000 Chevy K3500 Truck Chrome & Argent Grille for Models with Composite Headlights
  • 1994-1999 Chevy Suburban C1500 Chrome & Argent Grille for Models with Composite Headlights
  • 1994-1999 Chevy Suburban C2500 Chrome & Argent Grille for Models with Composite Headlights
  • 1994-1999 Chevy Suburban K1500 Chrome & Argent Grille for Models with Composite Headlights
  • 1994-1999 Chevy Suburban K2500 Chrome & Argent Grille for Models with Composite Headlights
  • 1995-1999 Chevy Tahoe Chrome & Argent Grille for Models with Composite Headlights
  • 2000 Chevy Tahoe Chrome & Argent Grille V8 5.7L for Models with Composite Headlights
Part #: 1ABGR00074

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More