Replaces
Chevy Grille - 1ABGR00073
1ABGR00073This replacement grille is just what you need to get your vehicle in good looking form again!
Specifications:
- Injection molded gloss black plastic
- Can be painted by the buyer to any color desired or installed as is
- High quality Chevy Truck grille that is built to strict quality control standards
- Direct bolt on - easy to install
- Has proper area for the Chevy emblem (not included)
- Fits vehicles with composite headlights only (not sealed beam lights)
NOTE: The emblem provision on this grille is slightly different from the original. This is to not infringe on Chevy's patten.
Makes a great replacement and has good cost savings over a dealer grille.
48 States Only:
Due to shipping restrictions, we can only ship this to a physical address within the Contiguous U.S. (lower 48 states).
NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.
Lifetime Warranty
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
-
step : Step 1:Remove the Two Parking Lights and Side Marker Lights. (0:18)
- Remove the 4 screws holding in the light.
- Pull the light free.
- Using the thumb tabs remove the light sockets.
- Repeat on the other side.
- Remove the bulb from the side marker lights.
-
step : Step 2: Removing the Grill (0:49)
- Remove the 10 bolts securing the grill.
- Lift up the grill and pull out, making sure all the wires are free.
-
step : Step 3: Installing a New Grill (1:50)
- Remove the 1/4 nuts securing the marker light.
- Remove the 1/4 nuts securing the reflector.
- Press the tabs and remove the valance from the grill.
- Attach the valance, reflector, and marker light to the new grill.
- Line up the grill and push it into place.
- Reinsert the 10 bolts.
- Twist the side marker light bulbs into place.
- Reconnect the parking lights and screw them into place.
Tools needed for replacement:
- Ratchet
- Socket Extensions
- Phillips Head Screwdriver
- 7mm Socket
- 7mm Wrench
- 1/2 Inch Wrench
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
Wrenches - Metric
Wrenches - SAE
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Reply(1)
- Inaccurate
- Tim K Staff on Sep 3, 2017
- Reply
- Inaccurate
- 1A Tech Guy Staff on Jan 4, 2016
- Reply
- Inaccurate
- Tim K Staff on Mar 1, 2017
Vehicle Fit
- 1994 Chevy Blazer Full Size Gloss Black Grille for Models with Composite Headlights
- 1994-1998 Chevy C1500 Truck Gloss Black Grille for Models with Composite Headlights
- 1994-2000 Chevy C2500 Truck Gloss Black Grille for Models with Composite Headlights
- 1994-2002 Chevy C3500 Truck Gloss Black Grille for Models with Composite Headlights
- 1994-1998 Chevy K1500 Truck Gloss Black Grille for Models with Composite Headlights
- 1994-2000 Chevy K2500 Truck Gloss Black Grille for Models with Composite Headlights
- 1994-2000 Chevy K3500 Truck Gloss Black Grille for Models with Composite Headlights
- 1994-1999 Chevy Suburban C1500 Gloss Black Grille for Models with Composite Headlights
- 1994-1999 Chevy Suburban C2500 Gloss Black Grille for Models with Composite Headlights
- 1994-1999 Chevy Suburban K1500 Gloss Black Grille for Models with Composite Headlights
- 1994-1999 Chevy Suburban K2500 Gloss Black Grille for Models with Composite Headlights
- 1995-1999 Chevy Tahoe Gloss Black Grille for Models with Composite Headlights
- 2000 Chevy Tahoe Gloss Black Grille V8 5.7L with Composite Headlights
This part replaces:
- Partslink GM1200239
- OE # 15981092