Replaces

Chevy GMC Textured Black Tailgate Handle - 1ABTH00063

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Black
  • Finish:   Textured

This replacement tailgate handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Textured Black Finish
  • Replaces dealer part number: 25775280
  • Direct replacement for original handle
  • Correct for New Body Models that use a Tailgate Lock

This part is a direct bolt on and is built to strict quality control standards. It is a great replacement and has good cost savings over a dealer unit.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Tail Gate Panel (0:42)
    • Remove the ten bolts lining the tail gate panel with a Phillips screwdriver
    • Remove the two 13mm bolts at the top of the tail gate panel
    • Remove the tail gate panel
  2. step : Removing the Tail Gate Handle (1:19)
    • Remove the 13mm bolt from the tailgate handle
    • Lift the tail gate
    • Pry off the tailgate handle bezel
    • Pry off the clip on the tailgate handle rod on both ends
    • Remove the rod from the tail gate on both ends
    • Remove the tailgate handle
    • Pry off the clip on the lock cylinder with a flat blade screwdriver
    • Remove the lock cylinder from the handle
  3. step : Installing the New Tail Gate Handle (2:52)
    • Push the clip onto the lock cylinder
    • Push the lock cylinder into the handle
    • Push the tail gate rods into the handle
    • Press the clips onto the tail gate handle rods
    • Press the bezel onto the tail gate handle
    • Press the bezel into place on the tail gate
    • Lower the tail gate
    • Tighten the 13mm bolt to the tail gate handle
  4. step : Reinstalling the Tail Gate Panel (3:59)
    • Insert the tail gate panel into place
    • Insert the two 13mm bolts into place
    • Insert the Phillips head screw bolts into place

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

4.38/ 5.0
8 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
3
1
0
0
tailgate handle
good part would buy again if needed also bought the latches also worked fine
April 24, 2017
It was a perfect fit. Following your YouTube instruction video made installation a snap. Couldnt be happier.
September 14, 2017
Great Service
I ordered a tailgate handle for my 2008 GMC. The part that arrived was for a locking gate, mine had no lock, and I think I made the ordering mistake. 1A Auto replaced the handle and sent the correct one, no questions asked. They didnt even have me return the incorrect part. What great service!!!
April 22, 2018
GREAT VIDEO & SUPER SERVICE
After reviewing the video and receiving prompt delivery the installation was very successful will use this service again in the future
December 13, 2018
Easy instll
Easy install, all necesary parts included. Fits perfect. Its only been installed about a month and so far so good, the only problem I see is if you do not lift the handle from right in the center it bends a bit and doesnt open the gate. Seems like this could end up being a failure point. Other than that I am pleased with the product and cannot beat the price.
July 4, 2019
Repair was easy!
I didnt know how big a job it was to replace the latching mechanism on my pickup tailgate. I searched for a video online and found the 1A how-to video. Looked simple. Went to their site and purchased the part. When it came twas a simple install after watching the video.
September 14, 2019
Hangs up.
After hooking it up at pulls very hard the left side releases the right side does not come up with the same time very flimsy inside. But were going to continue to try it.
September 26, 2019
tailgate latch handle for 2011 silverado
part fit great took only 10 minutes to install. Would recomened this product
October 17, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007Chevy Silverado 1500 Chevy Silverado 1500 New Body Style with Lock Provision Textured Black Tailgate Handle
2008-2013Chevy Silverado 1500 Chevy Silverado 1500 with Lock Provision Textured Black Tailgate Handle
2007Chevy Silverado 2500 HD Chevy Silverado 2500 HD New Body Style with Lock Provision Textured Black Tailgate Handle
2008-2014Chevy Silverado 2500 HD Chevy Silverado 2500 HD with Lock Provision Textured Black Tailgate Handle
2007Chevy Silverado 3500 HD Chevy Silverado 3500 HD New Body Style with Lock Provision Textured Black Tailgate Handle
2008-2014Chevy Silverado 3500 HD Chevy Silverado 3500 HD with Lock Provision Textured Black Tailgate Handle
2007GMC Sierra 1500 GMC Sierra 1500 New Body Style with Lock Provision Textured Black Tailgate Handle
2008-2013GMC Sierra 1500 GMC Sierra 1500 with Lock Provision Textured Black Tailgate Handle
2007GMC Sierra 2500 HD GMC Sierra 2500 HD New Body Style with Lock Provision Textured Black Tailgate Handle
2008-2014GMC Sierra 2500 HD GMC Sierra 2500 HD with Lock Provision Textured Black Tailgate Handle
2007GMC Sierra 3500 HD GMC Sierra 3500 HD New Body Style with Lock Provision Textured Black Tailgate Handle
2008-2014GMC Sierra 3500 HD GMC Sierra 3500 HD with Lock Provision Textured Black Tailgate Handle
Part 1ABTH00063
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.