Chevy GMC Cadillac Rear Premium Posi Semi-Metallic Brake Pads - 1ABPS00812

This rear disc brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

• Premium Posi Semi-Metallic Disc Brake Pads
• 4 Piece REAR Brake Pad Set
• Direct replacement

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

• The very same manufacturing process the original equipment manufacturers use
• High density friction material for long pad life
• Less resin content virtually eliminates brake fade and glazing
• Reduced dusting for both Ceramic and Semi-metallic materials
• Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

step : Removing the Wheel (0:36)

• Loosen the lug nut covers with a 22mm socket
• Pull off the center cap
• Loosen the lug nuts with the vehicle on the ground
• Raise the vehicle with a floor jack
• Secure the vehicle on jack stands
• Remove the lug nuts
• Pull off the wheel

step : Inspecting the Brakes (1:01)

• Check for gouges on both sides of the rotor
• Check the thickness of the brake pads

step : Removing the Brake Pads (1:14)

• Remove the two 12mm bolts from the brake caliper
• Use a large C-clamp to press in the brake caliper piston
• Pull the caliper aside
• Pry the brake pads off with a flat blade screwdriver

step : Installing the New Brake Pads (2:20)

• Apply brake grease to the tabs of the new brake pads
• Put an old pad in the caliper
• Use a large C-clamp and the old pad to push the pistons further back
• Install the new brake pads into the bracket
• Put the caliper on
• Thread the two 12mm bolts by hand
• Tighten bolts to 30 foot-pounds of torque

step : Reattaching the Wheel (3:38)

• Slide the wheel into place
• Start the lug nuts by hand
• Tighten the lug nuts preliminarily
• Lower the vehicle to the ground
• Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
• Reattach the center cap
• Tighten the lug nut covers

step : Testing the Brakes (4:17)

• Pump your brakes repeatedly until they feel firm
• Test your brakes at 5 miles per hour and then 10 miles per hour
• Road test the vehicle