Chevy GMC Cadillac Front Driver Side Power Window Regulator without Motor TRQ - 1AWRG01631

Specifications:

• Fits LH (Driver Side) FRONT
• Power operation
• Dual rail style
• Does not include power window motor

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Build to strict quality standards

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

step : Removing the Door Panel (0:39)

• Pry up the window switch panel by hand
• Disconnect the window switch wiring harnesses
• Remove the bolts from the door pull
• Remove the bolt at the bottom of the door panel
• Pry off the mirror base trim piece by hand
• Pry off the door handle trim piece with a flat blade screwdriver
• Lift the door panel up and off
• Pry off the courtesy light with a flat blade screwdriver
• Disconnect the wiring harnesses from the door panel
• Disconnect the door latch rod with a flat blade screwdriver
• Remove the bolt from the door handle
• Slide the door handle off
• Carefully peel off the water shield

step : Removing the Window Regulator (2:35)

• Disconnect the window motor lead
• Loosen the two bolts that hold the window to the regulator
• Hold the window in place with painter's tape
• Remove the bolts from the regulator
• Pull the window regulator out through the door

step : Installing the Window Regulator (3:45)

• Insert one of the bolts into the window regulator
• Push the regulator into the door
• Hang the regulator by its bolt
• Insert the bolts into the regulator
• Connect the window motor lead
• Connect the window switch wiring harness
• Raise the window with the switch
• Disconnect the window switch wiring harness
• Remove the painter's tape from the window
• Lower the window onto the regulator
• Insert the two bolts that hold the window to the regulator

step : Reinstalling the Door Panel (5:28)

• Put the water shield into place
• Connect the latch rod to the door handle
• Slide the door handle on
• Insert the bolt into the door handle
• Connect the wiring harnesses to the door panel
• Push the courtesy light into place
• Lift the door panel into place
• Push in the door panel clips
• Push the switches into the door
• Insert the bolts into the door pull
• Insert the bolt at the bottom of the door panel
• Slide on the door handle trim piece
• Push on the mirror base trim piece
• Connect the window switch wiring harnesses
• Push in the window switch panel