Chevy GMC Cadillac Air Ride Suspension Compressor Arnott P-2793

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews

  • Brand New Arnott Air Suspension Compressor
    • no core charge
  • Includes compressor, air line, dryer, & relay
  • Complete assembly
  • Includes detailed instructions
  • Durability tested for over 1,000 hours
ARNOTT is your source for air shocks and air suspension components for Lincoln, Ford, Cadillac, Lexus and Range Rover. Since 1989, Arnott has been designing and manufacturing quality air struts, compressors (pumps) and air bags (springs). Arnott continues to lead in research and development of new products while maintaining affordable prices.

Suspension system air leaks are the leading cause of compressor failure.  We recommend inspecting all of your vehicle's air lines and air springs for wear or cracks to avoid premature wear and damage to the new suspension compressor pump.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

Installation Instructions

  1. step : Removing the Air Ride Compressor (0:44)
    • Remove the spare wheel
    • Pull the hose off of the air ride compressor
    • Reset the hose clip
    • Loosen the three 12mm nuts from the compressor
    • Lift the air compressor up and out
    • Disconnect the compressor wiring harness
    • Disconnect the second compressor hose at the chassis
  2. step : Removing the Motor from the Compressor (2:27)
    • Pull the clips out of the compressor cover with a pair of pliers
    • Remove the three T25 Torx bolts from the compressor
    • Pull the motor off of the compressor
  3. step : Preparing the New Motor (3:31)
    • Disconnect the hose from the old motor
    • Push the hose onto the motor
    • Pry the wiring harness from the old motor
    • Remove the Phillips screw from the old motor
    • Remove the wire ties from the wiring harness
    • Pull back the wiring covers
    • Clip the wires with wire cutters
    • Match the wires to the corresponding, color-coded ones on the new motor
    • Clip each wire
    • Strip the end of each wire
    • Push the wires into the splices
    • Crimp the splices with pliers
    • Put the compressor in a vice
    • Twist the drier off of the compressor
    • Remove the three T25 screws from the old motor bracket
  4. step : Preparing the new Drier (7:32)
    • Note that there is a spring inside the drier
    • Carefully twist off the lid of the drier
    • Pull the spring out of the drier
    • Pull the gasket out of the drier
    • Pull the screen out of the drier
    • Pull the pad out of the drier
    • Remove the beads from the drier
    • Pull the second pad out of the drier
    • Pull the second screen out of the drier
    • Insert the new screen into the drier
    • Insert the new pad into the drier
    • Pour the new beads into the drier
    • Insert the second new pad into the drier
    • Insert the second new screen into the drier
    • Put the new spring in place
    • Put a new gasket on the drier lid
    • Twist on the drier lid
  5. step : Reconstructing the Compressor (9:10)
    • Put a new O-ring onto the drier end
    • Twist the drier onto the compressor
    • Loosen the 8mm bolt from the compressor
    • Insert the wire from the old compressor
    • Tighten the 8mm bolt
    • Reconnect the wiring harness to the drier
    • Push the pads into the bracket
    • Put the compressor onto the bracket
    • Insert the three T25 screws to attach the new motor to the bracket
    • Seat the wiring harness in the bracket
  6. step : Reinstalling the Compressor (10:41)
    • Connect the compressor wiring harness
    • Hang the compressor in place by its bolts
    • Tighten the 12mm nuts onto the compressor bracket
    • Push the compressor hoses back into place

Tools needed for replacement:

    General Tools

  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Wire Cutters
  • Wire End Cutters

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 8mm Socket

  • Specialty Tools

  • Vise-Grips

  • Star Drivers & Sockets

  • T25 Driver

4.75/ 5.0
8 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Wrong part for 2000 Yukon
I have the 2000 Yukon SLT and the compressor was in the middle. This is the one model that this does not fit. Wasted 2 hours at the dealer to find out it was the wrong part and 2 hours to cross the border to return it. They did handle the return and the staff are great overall.
July 1, 2017
Air Ride Suspension Compressor Arnott P-2793
Very low noise, comes with all the wiring harnesses and air lines. As good or even better than the OEM. Comes with a Limited Life Time Warranty from 1aauto. You can;t go wrong with that.
July 28, 2017
Excellent Product
Held off ordering this when my original compressor was making a terrible sound in fear of the install. Kicking myself for waiting so long, install was easy and the product is very quiet on my 09 Tahoe. I highly recommend this product.
February 21, 2018
Awesome site. Ordered a compressor for air ride suspension for 2003 cadillac escalade. Dealers wanted about 1500.00 for same part. Paid 349.00 for the identical part. Took 10 min to install with video. Arrived in a few days. Highly recommend this co.
April 16, 2018
Super great. Got it and installed it the same day. When we called around to dealership it was going to cost $800. This was amazing.
July 2, 2018
Fantastic Repair
Just saved $1100.00 by the help of 1A and the part replacement. Video was perfect and took me 30 minutes to do a job that was quoted by the dealer at $1400.
July 6, 2018
Fast, accurate, good price
Recently ordered an Air Ride Suspension Compressor from 1A Auto. The person I talked to on the phone was very helpful and guided me to the best, most reliable solution for my 2014 Tahoe. The part arrived within three days. I used the on-line video to learn about the removal and installation. I saved almost $500 by doing it myself with 1A Auto rather than having the stealership do it. Thanks 1A Auto! Ill be ordering more in the future!
July 19, 2018
01 GMC Yukon XL Fits Perfect and Works
Part was the right part. It worked. It was extremely easy to put in. I got all my air ride parts fro so dont hesitate George Bush the button! In all seriousness comes with all the parts you need the instructions are online at Arnott. Review them but it is pretty easy like I said.
August 6, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2014Cadillac Escalade Cadillac Escalade Air Ride Suspension Compressor
2003-2014Cadillac Escalade ESV Cadillac Escalade ESV Air Ride Suspension Compressor
2003-2013Cadillac Escalade EXT Cadillac Escalade EXT Air Ride Suspension Compressor
2007-2013Chevy Avalanche Chevy Avalanche Air Ride Suspension Compressor
2002-2006Chevy Avalanche 1500 Chevy Avalanche 1500 Air Ride Suspension Compressor
2000-2014Chevy Suburban 1500 Chevy Suburban 1500 Air Ride Suspension Compressor
2000-2013Chevy Suburban 2500 Chevy Suburban 2500 Air Ride Suspension Compressor
2000Chevy Tahoe Chevy Tahoe (without Z71 Package) Air Ride Suspension Compressor
2001-2014Chevy Tahoe Chevy Tahoe Air Ride Suspension Compressor
2001-2014GMC Yukon GMC Yukon Air Ride Suspension Compressor
2000-2014GMC Yukon XL 1500 GMC Yukon XL 1500 Air Ride Suspension Compressor
2000-2013GMC Yukon XL 2500 GMC Yukon XL 2500 Air Ride Suspension Compressor
Only 3 left in stock
Part ARASC00030
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: P-2793