Replaces

Front Ceramic Brake Pads TRQ

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Kit Includes:
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Remove wheel. (1:15)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 19mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 19mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the rear brake calipers (1:46)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 14mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 18mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Screw in the two 10M bolts to remove the rotor.
    • Take care not to damage the lug studs.
  3. step : Install new rear brake rotor and pads (6:30)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 90-100 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 15-20 ft lbs.
  4. step : Put the rear wheel back on (10:25)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 100 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (11:00)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • M10 x 7cm bolts
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will these pads fit a SAAB 9-7 X with a 6 cylinder engine? I know the rotors are slightly smaller on the 6 cylinder as compared to the ones one the 8 cylinder
Kevin K November 5, 2019
Thank you for the inquiry. These pads will fit the 2006-2009 9-7X regardless of the engine size for these years. If your vehicle is a different year, they will not be correct for your application.
Ian P November 5, 2019

Fits the following Makes:

Year Make Model Description
2008-2017Buick Enclave Buick Enclave Front Ceramic Brake Pads
2006-2007Buick Rainier Buick Rainier Front Ceramic Brake Pads
2009-2012Chevrolet Colorado Chevy Colorado Front Ceramic Brake Pads
2006Chevrolet SSR Chevy SSR Front Ceramic Brake Pads
2006-2009Chevrolet Trailblazer Chevy Trailblazer Front Ceramic Brake Pads
2006Chevrolet Trailblazer EXT Chevy Trailblazer EXT Front Ceramic Brake Pads
2009-2017Chevrolet Traverse Chevy Traverse Front Ceramic Brake Pads
2007-2016GMC Acadia GMC Acadia Front Ceramic Brake Pads
2009-2012GMC Canyon GMC Canyon Front Ceramic Brake Pads
2006-2009GMC Envoy GMC Envoy Front Ceramic Brake Pads
2006GMC Envoy XL GMC Envoy XL Front Ceramic Brake Pads
2007-2008Isuzu Ascender Isuzu Ascender Front Ceramic Brake Pads
2006-2009Saab 9-7X Saab 9-7X Front Ceramic Brake Pads
2007-2010Saturn Outlook Saturn Outlook Front Ceramic Brake Pads

Part Interchange

Brand Label Part Number
Raybestos SP1169ATRH
Raybestos SGD1169AC
Raybestos MGD1169ACH
Raybestos EHT1169AH
Raybestos Brakes SGD1169AC
Raybestos Brakes MGD1169ACH
Raybestos Brakes SP1169ATRH
Raybestos Brakes EHT1169AH

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ABPS02795
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BFA73341