Replaces

Chevy GMC Buick Pontiac Olds Front Cross Drilled & Slotted Performance Brake Rotor Pair - 1APBR00248

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Front Brake Rotor Specifications:
      Vented
      5 Lug
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Quantity:   Pair
  • Product Line:   Performance

Specifications:

  • Comes as a matched Pair
  • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Direct replacement
  • 10 1/2 Inch Diameter

Note:

The rotors do not include wheel bearings or seals.

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Reassemble the bearings. (0:30)
    • Use race installation tools or a block of wood to assemble the inner bearing.
    • Pack the outer bearing with bearing grease.
    • Inspect the spindle and clean it with a paper towel.
    • Mount the rotors and insert the outer bearing.
    • thread your washer and bolt on.
    • Tighten the bolt some with your ratchet and then loosen it; this will seat the outer bearing.
    • Put the nut and dust cap on.
  2. step : Install the new brakes (5:09)
    • Clean the brake rotors with brake cleaner.
    • Clean the caliper sleeves with a wire brush.
    • Apply anti-seize grease to the edges of the brake pads where they slide into the calipers.
    • Compress your caliper pistons with a large C-Clamp
    • Put the brake pads into the caliper.
    • Mount the caliper.
    • Clean up your caliper bolts and apply a little anti-seize grease to them.
    • Torque the caliper bolts to 45 ft lbs.
  3. step : Put the wheel back on (8:53)
    • Thread the lug nuts on
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 100 ft lbs

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack
  • Large C-Clamp

  • Hex Wrenches

  • 3/8 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Block of Wood
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 27mm socket

  • Specialty Tools

  • Race Installation Tools

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Not much use yet, but so far, so good. When paired with the Akebono brake pads, its a smooth combination with no break in period whatsoever. Will send another review after they have more miles on them.
February 24, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
does these come with the hubs like pic shows?
Bryon Z October 12, 2018
Yes they do. The hub and rotor are all one piece.
J H October 13, 2018
Yes they do. All you have to supply are the bearings. I’ve got a great tip for you. Use the Royal Purple bearing grease. I promise, this is the best grease for your bearings. You won’t be disappointed. Just make sure you pack the bearings really, really well.
Todd L October 13, 2018
Yes! I ordered a paur if these a while back and love them. Theyre exactly as pictured and the coating has held up unbelievably well, no rust on them.
D A October 13, 2018
These arrive exactly as pictured. I put on 79 el Camino. No rust!!
John W October 25, 2018
Year Make Model Description
1982-1987Buick Regal Buick Regal Front Cross Drilled & Slotted Performance Brake Rotor Pair
1983-1990Chevy Blazer S10 Chevy Blazer S10 Rear Wheel Drive Front Cross Drilled & Slotted Performance Brake Rotor Pair
1991Chevy Blazer S10 Chevy Blazer S10 Rear Wheel Drive without ABS Brakes Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1987Chevy Camaro Chevy Camaro Front Cross Drilled & Slotted Performance Brake Rotor Pair
1988-1992Chevy Camaro Chevy Camaro with 10.5 in. (267mm) Diameter Rotors Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1987Chevy El Camino Chevy El Camino Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1983Chevy Malibu Chevy Malibu Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1988Chevy Monte Carlo Chevy Monte Carlo Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1993Chevy S10 Pickup Chevy S10 Pickup Rear Wheel Drive Front Cross Drilled & Slotted Performance Brake Rotor Pair
1994-1995Chevy S10 Pickup Chevy S10 Pickup L4 2.2L Rear Wheel Drive Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1987GMC Caballero GMC Caballero Front Cross Drilled & Slotted Performance Brake Rotor Pair
1983-1990GMC Jimmy S-15 GMC Jimmy S-15 Rear Wheel Drive Front Cross Drilled & Slotted Performance Brake Rotor Pair
1991GMC Jimmy S-15 GMC Jimmy S-15 Rear Wheel Drive without ABS Brakes Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1990GMC S-15 Pickup GMC S-15 Pickup Rear Wheel Drive Front Cross Drilled & Slotted Performance Brake Rotor Pair
1991-1993GMC S-15 Sonoma GMC S-15 Sonoma Rear Wheel Drive Front Cross Drilled & Slotted Performance Brake Rotor Pair
1994-1995GMC S-15 Sonoma GMC S-15 Sonoma L4 2.2L Rear Wheel Drive Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1987Oldsmobile Cutlass Olds Cutlass Front Cross Drilled & Slotted Performance Brake Rotor Pair
1985-1987Oldsmobile Cutlass Salon Olds Cutlass Salon Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1988Oldsmobile Cutlass Supreme Olds Cutlass Supreme Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1986Pontiac Bonneville Pontiac Bonneville Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1987Pontiac Firebird Pontiac Firebird Front Cross Drilled & Slotted Performance Brake Rotor Pair
1988-1992Pontiac Firebird Pontiac Firebird with 10.5 in. (267mm) Diameter Rotors Front Cross Drilled & Slotted Performance Brake Rotor Pair
1982-1987Pontiac Grand Prix Pontiac Grand Prix Front Cross Drilled & Slotted Performance Brake Rotor Pair
Part 1APBR00248
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.